Search

Custom Search

Thursday, December 18, 2008

manufacturing JOB | Dec 19, 2008

.
.
Kiln Engineer (Johor - Kluang)
.
Responsibilities:
Knowledge in porcelain tiles manufacturing especially in firing operations
Optimize kiln roller and gas consumption in the kilns' operations
Responsible for operation maintenance planning and preventive maintenance programme
Evaluate and review the performance of each programme to ensure the activities are carried out effectively as planned
Develop a structured training programme to help employee improve on their competency
Monitoring production process control and to provide technical support
.
Requirements:
Advanced Diploma/Degree in Mechanical/Electrical/Mechatronic Engineering
Minimum 3 years working experience especially in production of a ceramic plant will be an added advantage
Computer literate
Good written and verbal communication skills in English
Can interact with all levels of staff
.
Interested, please send/e-mail a detailed resume with telephone contact number to :
Manufacturing Manager
GUOCERA TILE INDUSTRIES SDN BHD (47977-A)
(KLUANG OPERATIONS)
201, Jalan Mengkibol,
86000 Kluang, Johor
.
.
.
Asst. Production Manager (Selangor - Petaling Jaya)
.
Responsibilities:
To help plan, organize, direct and control manpower and equipment capacity to maximise utilization to meet the production schedules.
Monitor product standards and implementing quality-control programmes.
Ensure daily/monthly output is achievable.
Initiate problem-solving and trouble-shooting processes so as to reduce the production related problems and delays.
Enhance cost controls and productivity by minimising down time, wastage, overtime etc.
Generate production reports, update specifications and work procedures.
Help to continually improve competency of supervisors and workers.
.
Requirements:
Diploma/Degree in Science or Engineering or equivalent.
Minimum 5 years relevant experience in the manufacturing industry.
Good communication, leadership and people-management skills.
A team player who is highly responsible and result-driven.
Able to work under tight deadlines and independently with minimum supervision.
Good computer skills.
Familiar with ISO 9001 : 2000 Quality Standards
If you are all the above, and would like to be compensated fairly based on performance, please write-in/ email/fax us your resume, current and expected salaries, plus a N.R. photograph to:
Signature International Bhd
Lot 24, Jalan Teknologi,
Taman Sains Selangor 1,
Kota Damansara,
47810 Petaling Jaya,
Selangor, Malaysia.
Tel: 03-62867000 Fax: 03-62867002
.
.
.
Operation Manager (Johor - Johor)
.
Responsibilities:
Overall incharge of the company operation, inclusive of General Admin, Purchasing, Production and Engieering Design.
.
Requirements:
Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding), Engineering (Electrical/Electronic), Engineering (Industrial) or equivalent.
Required skill(s): Mechnical, Electrical, Management.
Preferred skill(s): Generator Knowledge.
Required language(s): Chinese, English
Preferred language(s): Bahasa Malaysia.
At least 05 year(s) of working experience in the related field is required for this position.
Preferably Managers specializing in Manufacturing/Production Operations or equivalent. Job role in Management or Project Management.
Full-Time positions available.
.
Applicants should be Malaysian citizens or hold relevant residence status.
Interested candidates are encouraged to apply online or you may submit your detailed resume to: McGen (M) Sdn Bhd
No. 28, Jalan Mega 1/4
Taman Perindustrian Nusa Cemerlang,
81550 Gelang Patah
Johor Darul Takzim,
Malaysia
Tel: 07 - 559 1191 Fax: 07 - 557 1191
.
.
.
Production Supervisor / Sr Supervisor (Injection Molding)(Johor - Senai)
.
Responsibilities:
Maintain production schedules and supervise the production in lines allocated.
Ensure production's quality and safety standard are complied with ISO standards.
Direct, control and motivate production staff in all.
Provide timely production and other performance related reports to the superior as required.
Liaises with quality assurance maintenance and personnel department on need basis to ensure production effectiveness.
.
Requirements:
Candidate must possess at least a Professional Certificate, Diploma or Advanced/Higher/Graduate Diploma in any field.
At least 3 year(s) of working experience in the injection molding line is required for this position.
Applicants must be willing to work in Senai.
Applicants should be Malaysian citizens or hold relevant residence status.
Preferably senior executives specializing in Manufacturing/Production Operations or equivalent.
Fresh graduates with Mechanical Engineering background are encouraged to apply.
Full-Time positions available.
.
Interested candidates are invited to apply online / write / fax-in with full resume stating personal and career history, current and expected salary and contact number to:
The Recruitment Division
V.S. INDUSTRY BERHAD
PTD 86556, Jalan Murni 12,
Murni Senai Industrial Estate,
81400 Senai, Johor,
Malaysia
Tel: 607 - 597 3399 Fax: 607 - 599 1752
.
.
.
Blaster/Paint Sprayer (Selangor)
.
Responsibilities:
Definition
Blasting and spray painting of several parts, like valves and industrial parts/ products.
.
Job summary
Preliminary treatment
Blast cleaning
Spray painting
Processing
Quality control
Remaining tasks
Description of activities
Prepare chokes and actuators in aid of spray painting. The activities are degreasing, blasting and making the products dustfree.
Spray painting
Before spray painting, check the preliminary treatments
Mixing applicable coating components
Spray painting of several kinds of paint on chokes and actuators
Cleaning of spray equipment after finishing the job
Quality check
To maintain a high quality standard, checking of all coating related activities and fill in the results on a checklist.
Remaining tasks
When needed, making up damaged products.
.
Qualifications:
You will have completed your training as a Blaster/Paint Sprayer or have at least 3 years experience of working in a similar field combined with education.
Accurate
Self Supporting
Flexible
You understand how to mix coating components and work with all colours
Experience with different type of coatings
You have the ability to follow Health & Safety / COSHH regulations relating to painting and paint products
.
Requirements:
Candidate must possess at least a Higher Secondary/STPM/"A" Level/Pre-U in any field.
Required language(s): English.
At least 4 year(s) of working experience in the related field is required for this position.
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Mokveld Malaysia Sdn Bhd
No 7, Jalan Anggerik Mokara 31/55
Seksyen 31, Kota Kemuning Shah Alam
40460.
.
.
BOILER TECHNICIAN (Selangor - SHAH ALAM, SELANGOR)
.
Responsibilities:
To handle LPG Gas Boilder unit on daily operation.
To monitor & update necessary record as required by DOSH and other related body.
Prepare & attend to boiler inspection by JKKP.
.
Requirements:
Candidate must possess Boiler Driver Grade 2 Certificate.
Minimum 1 year of relevant working experience in a manufacturing environment.
Ensure the Company meets all the government regulations ie DOSH, DOE & local authority.
Able to work on shift basis
Able to perform duties independently.
.
Interested applicants with the above requirements are invited to apply online with photo or you may write in with your detailed resume to:
Tylon Manufacturing (Malaysia) Sdn Bhd
Lot No. 5 Persiaran Perusahaan
Seksyen 2340000 Shah Alam
Selangor Darul Ehsan
Tel: 03 - 5541 6066 Fax: 03 - 5541 6077
.
.
.
REGULATORY AFFAIR EXECUTIVE (Selangor - Sepang)
.
Responsibilities:
To assist in the coordination and handling of customer complaints for timely completion of investigation report.
To assist the Head of Department to recommend policies, objectives and strategies, including short term and long term plans in the implementation and coordination of the Company policies on Good Manufacturing Practices and all documentations pertaining to Quality Assurance Manual, Change Control, Quality Records, Revisions Documents and Product Technical Files.
To assist in the Company’s self Audit Program, FMEA and other continuous improvement programs.
.
Requirements:
Degree in any discipline.
1-2 years related experience.
Knowledge of QSR/ISO 9001 : 2000/ISO 13485 : 2003/ISO 14971 : 2000 will be an advantage.
Computer literate.
Fresh graduates are encouraged to apply.
.
BENEFITS
We offer attractive remuneration package commensurate with qualifications and experience, which include excellent training and career development opportunities.
.
We would like to hear from you. Please write/ fax/email us your resume stating your current and expected salary complete with photo (n.r) to:
Head of Human Capital
WRP Asia Pacific Sdn Bhd
Lot 1, Jalan 3, Kawasan Perusahaan Bandar Baru Salak Tinggi,
43900 Sepang, Selangor,
MALAYSIA.
Tel: +603-87061486 FAX +603-87061488
.
.
.
Draughtsman (Johor)
.
Requirements:
Candidate must possess at least a Diploma in Art/Design/Creative Multimedia or equivalent
Must be proficient with AutoCad 2008
Able to work independently and enthusiasm
At least 2 years of working experience in the related field
Able to speak in English & Chinese
.
Interested applicants are invited to apply online or write - in your detailed resume stating your current and expected salary and contact number with passport - sized photograph (n.r) Ms Lai / Pn Mas at:
Koda Woodcraft Sdn Bhd (102208 - X)
Block A & B, Lot 9,
Mukim Senai-Kulai,
P.O.Box 79,81400
Senai,Johor.
Tel: 07 - 5995028 Email: lmlai@kodaltd.com
.
.
.

Toolmaker (Johor)
.
Responsibilities:
Perform day to day job as instructed by Tool room supervisor
Perform tool repairs and maintenance based on tool repair report and complete the TRR after repair the tooling.
Make continuous improvement to the tooling
Trouble shoot tooling problem
Liaise with production tool setter to resolve tooling problem
Ad-hoc duties assigned by tool room manager
.
Requirements:
Candidate must possess at least a Professional Certificate in Engineering (Metal Fabrication/Tool & Die/Welding) or equivalent.
Minimum 5 years of working experience in precision and high speed metal stamping company.
People oriented, excellent communication and inter-personal skills.
Independent, resourceful, self motivated with high integrity
Able to write and read in English and Bahasa Malaysia
Able to work shift
Able to use Autocad, read 2D drawing and design of die.
Able to perform grinding, milling, turning and wire-cut.
.
Interested candidates are encouraged to apply online or send your resume to the following address:
Human Resource Department
BL Specialties Malaysia Sdn Bhd
No. 5, Jalan Jati,
Taman Perindustrian Tiram Utama,
81800 Ulu Tiram,
Johor
.
.
.
Custom Search