.
.
Production Technicians(Penang - Bayan Lepas)
.
Responsibilities:
To meet daily target for output, yield & quality as set under KRA objectives
To run production lots and perform minor machine maintenance job
.
Responsibilities:
To meet daily target for output, yield & quality as set under KRA objectives
To run production lots and perform minor machine maintenance job
.
Requirements:
Certificate in Engineering or Science
Able to undertake rotating shift assignment (ie 12 hours) in a clean room environment
Ability to communicate and understand English is a pre-requisite
Fresh female graduates are also strongly encouraged to apply
Applicants should be Malaysian citizens or hold relevant residence status.
Certificate in Engineering or Science
Able to undertake rotating shift assignment (ie 12 hours) in a clean room environment
Ability to communicate and understand English is a pre-requisite
Fresh female graduates are also strongly encouraged to apply
Applicants should be Malaysian citizens or hold relevant residence status.
.
OSRAM Opto Semiconductors (Malaysia) Sdn Bhd
Bayan Lepas Free Industrial Zone,
Phase 1, - - 11900.
.
.
Production Executive(Selangor)
.
Responsibilities:
The incumbent will be assisting the Plant Manager in achieving the production’s KPI, fulfilling the sales requirement, ensuring the plant operation complies to HACCP, ISO 9001 : 2000 and OHSAS 18000 requirement. He will also be responsible for ensuring the qualities of the products are within the above specifications.
.
The incumbent will be assisting the Plant Manager in achieving the production’s KPI, fulfilling the sales requirement, ensuring the plant operation complies to HACCP, ISO 9001 : 2000 and OHSAS 18000 requirement. He will also be responsible for ensuring the qualities of the products are within the above specifications.
.
Requirements:
Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Science & Technology, Food Technology/Nutrition/Dietetics or equivalent.
At least 2 year(s) of working experience in the related field is required for this position.
Preferably Junior Executives specializing in Manufacturing/Production Operations or equivalent. Job role in Process Engineer or equivalent.
Able to work on shift rotation.
Good problem-solving skills and drive for result.
Team player with good relationship management and communication skills.
Good knowledge in MS Office software
High level of commitment to meet tight deadlines
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Science & Technology, Food Technology/Nutrition/Dietetics or equivalent.
At least 2 year(s) of working experience in the related field is required for this position.
Preferably Junior Executives specializing in Manufacturing/Production Operations or equivalent. Job role in Process Engineer or equivalent.
Able to work on shift rotation.
Good problem-solving skills and drive for result.
Team player with good relationship management and communication skills.
Good knowledge in MS Office software
High level of commitment to meet tight deadlines
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Interested candidates are invited to apply on-line or write-in with a full resume stating qualifications, contact number, working experience and expected salary together with a recent passport-sized photograph to :
F&N Dairies (M) Sdn Bhd
Human Resources Department
No. 70, Jalan University
46700 Petaling Jaya
Selangor Darul Ehsan
.
.
Production Supervisor(Penang - PRAI -PENANG)
.
.
Requirements:
Candidate must possess at least a Diploma in Food Technology/Chemistry
Experience in ISO and HACCP is an advantage
Applicants must be willing to work in PRAI -PENANG.
With more than 5years experience in production flow will be preferred
Having a good leadership in managing workers
Possess good interpersonal and communication skills
Know to calculate and write basic English, Malay
Applicants should be Malaysian citizens or hold relevant residence status.
.
Candidate must possess at least a Diploma in Food Technology/Chemistry
Experience in ISO and HACCP is an advantage
Applicants must be willing to work in PRAI -PENANG.
With more than 5years experience in production flow will be preferred
Having a good leadership in managing workers
Possess good interpersonal and communication skills
Know to calculate and write basic English, Malay
Applicants should be Malaysian citizens or hold relevant residence status.
.
Interested candidates, please apply online or write in with complete resume including contact number, expected salary and recent passport sized photograph (n.r.) to be addressed to :
EURO CHEMO-PHARMA SDN BHD (27975-H)
2408 & 2809, Lorong Perusahaan Satu
Prai Industrial Estate,
13600 Prai,
Penang
Malaysia
TEL:04-3997337 & 3901941 FAX:04-3997513 & 3987606
.
.
.
Fresh Technician (Penang - Bayan Lepas)
.
.
Responsibilities:
Depends on the department being assigned, eg. Process Engineering, Test Engineering, QA Engineering, etc.
.
Depends on the department being assigned, eg. Process Engineering, Test Engineering, QA Engineering, etc.
.
Requirements:
Diploma Engineering Courses
Knowledge in MS office
Required to work on shifts
Applicants should be Malaysian citizens or hold relevant residence status
Diploma Engineering Courses
Knowledge in MS office
Required to work on shifts
Applicants should be Malaysian citizens or hold relevant residence status
.
Plexus Manufacturing Sdn Bhd ( Hillside )
Free Industrial Zone,
Phase II 11900 Bayan Lepas Penang,
Malaysia.
Plexus Manufacturing Sdn Bhd ( Seaside )
Bayan Lepas Free Industrial Zone Phase IV,
11900 Bayan Lepas Penang,
Malaysia
.
.
.
Tool-Room Manager (Johor - Senai)
.
Responsibilities:
Overall responsible for the quality and efficiency of the tool-room
Managing and lead a team of CNC programmers and machinists
Responsible for planning and managing tool-room schedules & activities
Plan and coordinate the work flow of tool-room
Ensure proper tooling, machine capacity and technical skills are in place
Creating and editing CNC programmes
.
Overall responsible for the quality and efficiency of the tool-room
Managing and lead a team of CNC programmers and machinists
Responsible for planning and managing tool-room schedules & activities
Plan and coordinate the work flow of tool-room
Ensure proper tooling, machine capacity and technical skills are in place
Creating and editing CNC programmes
.
Requirements:
Professional Certificate in metal fabrication / tool & die / machining or equivalent
Prior experience in tool-room operations is required
Prior experience working with CNC equipment is required
Some CNC / CAM programming experience desired
Some experience in high speed machining is an advantage
Good analytical and problem solving skills
Strong interest in learning and improving skills
Able to communicate in English
Able to work independently, resourceful, be proactive and be a good team player
Benefits
Attractive remuneration
Medical insurance coverage for self & family
Transport allowance
International company with overseas travelling opportunities
Provide continuous learning opportunities
5 days work weekInterested applicants, please write-in with detailed resume stating current and expected salary together with a recent n.r photograph to:
Professional Certificate in metal fabrication / tool & die / machining or equivalent
Prior experience in tool-room operations is required
Prior experience working with CNC equipment is required
Some CNC / CAM programming experience desired
Some experience in high speed machining is an advantage
Good analytical and problem solving skills
Strong interest in learning and improving skills
Able to communicate in English
Able to work independently, resourceful, be proactive and be a good team player
Benefits
Attractive remuneration
Medical insurance coverage for self & family
Transport allowance
International company with overseas travelling opportunities
Provide continuous learning opportunities
5 days work weekInterested applicants, please write-in with detailed resume stating current and expected salary together with a recent n.r photograph to:
Prent (Malaysia) Sdn Bhd
PLO 163, Jalan Cyber Utama
Taman Industri Senai 381400,
Senai, Johor
Fax : 07-599 7660
Email: hr@prent.com.my
Website : www.prent.com
.
.
.
Mold Designer(Penang - Perai, Penang)
.
Requirements:
Candidate must possess at least a SPM or Diploma /Certificate in tool designing.
Required skill(s): knowledge in Autocad and UG system.
Preferred skill(s): relevant working experience in plastic injection moulding industries.
Knowledge in mold fabrication design and Unigraphics software.
Required language(s): Bahasa Malaysia, English
Preferred language (s) : Chinese
At least 5 year(s) of working experience in the related field is required for this position.
Full-Time positions available.
Applicants should be Malaysian citizens.
Be part of our global family as we offer an attractive salary package and career growth to the successful candidate. Interested candidates are required to apply ONLINE to:
.
Requirements:
Candidate must possess at least a SPM or Diploma /Certificate in tool designing.
Required skill(s): knowledge in Autocad and UG system.
Preferred skill(s): relevant working experience in plastic injection moulding industries.
Knowledge in mold fabrication design and Unigraphics software.
Required language(s): Bahasa Malaysia, English
Preferred language (s) : Chinese
At least 5 year(s) of working experience in the related field is required for this position.
Full-Time positions available.
Applicants should be Malaysian citizens.
Be part of our global family as we offer an attractive salary package and career growth to the successful candidate. Interested candidates are required to apply ONLINE to:
First Engineering Plastics (M) Sdn Bhd
651 Lorong Perusahaan Maju 8,
Prai Industrial Estate,
Phase 4,13600 Prai,
Penang
.
.
.
General Manager(Johor - Malaysia / Singapore)
.
.
Responsibilities:
Reporting to top management of the Battery Division, you will be in-charge of one of our battery plants in Malaysia/Singapore.
With full P&L responsibility, your mandate is to ensure the sound operation and effective control within the production plant in accordance with the company directions and relevant laws and regulations of the Malaysia/Singapore.
You should review the production workflow and recommend the cost saving or resources allocation strategies whenever necessary.
You are expected to develop a strong management team to support the continuous growth through people development and succession planning.
Very often, you have to interact with the management team in other battery plants and departments within the Battery Division.
.
Reporting to top management of the Battery Division, you will be in-charge of one of our battery plants in Malaysia/Singapore.
With full P&L responsibility, your mandate is to ensure the sound operation and effective control within the production plant in accordance with the company directions and relevant laws and regulations of the Malaysia/Singapore.
You should review the production workflow and recommend the cost saving or resources allocation strategies whenever necessary.
You are expected to develop a strong management team to support the continuous growth through people development and succession planning.
Very often, you have to interact with the management team in other battery plants and departments within the Battery Division.
.
Requirements:
Bachelor Degree in Business Administration, Operations or related disciplines.
A minimum of 12 years factory management experience of which 5 years or above in a similar position. Proven track record in effective factory management in Malaysia/Singapore.
Knowledge and experience of battery production will be an advantage.
Strategic thinking with strong business acumen, dynamic, self-motivated and result-oriented.
Good financial sense and cost awareness.
Excellent leadership skill and management techniques.
Experience in working in key corporation / MNC an advantage
Good command of both spoken and written English. Mandarin is not a must but preferable.
Can understand Chinese preferable
Please send full resume and expected salary to: recruit_gpbi@goldpeak.com (in word format).
Bachelor Degree in Business Administration, Operations or related disciplines.
A minimum of 12 years factory management experience of which 5 years or above in a similar position. Proven track record in effective factory management in Malaysia/Singapore.
Knowledge and experience of battery production will be an advantage.
Strategic thinking with strong business acumen, dynamic, self-motivated and result-oriented.
Good financial sense and cost awareness.
Excellent leadership skill and management techniques.
Experience in working in key corporation / MNC an advantage
Good command of both spoken and written English. Mandarin is not a must but preferable.
Can understand Chinese preferable
Please send full resume and expected salary to: recruit_gpbi@goldpeak.com (in word format).
.
.
.
Mechanical Engineer(Johor - Senai)
.
.
Responsibilities:
Able to supervise sub-contractor/supplier, work under pressure and meet tight deadlines.
Aggressiveness, strong leadership and good people skills.
Plan schedule, delegate and supervise on-going assembly, installation and commissioning of all projects that been assigned.
.
Able to supervise sub-contractor/supplier, work under pressure and meet tight deadlines.
Aggressiveness, strong leadership and good people skills.
Plan schedule, delegate and supervise on-going assembly, installation and commissioning of all projects that been assigned.
.
Requirements:
Candidate must possess at least a Diploma or Degree in Engineering or equivalent.
Required skill(s): Knowledge of basic Pneumatic, Hydraulic and Machine Assembly.
Able to communicate in Madarin, English and Bahasa Malaysia
At least 2 year(s) of working experience in the related field is required for this position.
Preferably Senior Executives specializing in Manufacturing/Production Operations or equivalent.
Willing to travel overseas.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Candidate must possess at least a Diploma or Degree in Engineering or equivalent.
Required skill(s): Knowledge of basic Pneumatic, Hydraulic and Machine Assembly.
Able to communicate in Madarin, English and Bahasa Malaysia
At least 2 year(s) of working experience in the related field is required for this position.
Preferably Senior Executives specializing in Manufacturing/Production Operations or equivalent.
Willing to travel overseas.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Interested applicants are encouraged to apply online
CFI Engineering Sdn Bhd
No.644, Jalan Idaman 3/9,
Desa Idaman,Senai Industrial Park,
81400 Senai,
Johor.
Telephone: +60-07-5989168 / 8268 Fax: +60-07-5983168
Email Address: janebo@cfi.com.my
.
.
.
Sheet Metal Welder/Technician(Penang - Bayan Lepas)
.
Responsibilities:
Do TIG & MIG welding.
Maintenance of machine & equipment..
To support Junior Technician in operating turret punch & bending machine.
Meet production target and quality required.
.
.
Responsibilities:
Do TIG & MIG welding.
Maintenance of machine & equipment..
To support Junior Technician in operating turret punch & bending machine.
Meet production target and quality required.
.
Requirements:
Candidate must possess at least a Primary/Secondary School/SPM/"O" Level, Diploma or Advanced/Higher/Graduate Diploma in Engineering (Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding), Engineering (Industrial) or equivalent.
At least 2 year(s) of working experience in MIG & TIG welding is required for this position.
Preferably Junior Executives specializing in Manufacturing/Production Operations or equivalent. Job role in Welder or equivalent.
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
Familiar with Aluminum welding will be advantage
Candidate must possess at least a Primary/Secondary School/SPM/"O" Level, Diploma or Advanced/Higher/Graduate Diploma in Engineering (Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding), Engineering (Industrial) or equivalent.
At least 2 year(s) of working experience in MIG & TIG welding is required for this position.
Preferably Junior Executives specializing in Manufacturing/Production Operations or equivalent. Job role in Welder or equivalent.
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
Familiar with Aluminum welding will be advantage
.
Dufu Industries Sdn Bhd / Dufu Technology Corp. Bhd
Plot 19 Free Industrial Zone Phase 4
Bayan Lepas 11900.
.
.
Project Manager(Perak - Ipoh)
.
.
Requirements:
Project planning, drafting, costing, budgeting and tender submissions
Construction site coordination for labour, materials, tools and equipment
Oversee on-site sub-contractors and manage project deadlines
Construction project work quality and site-safety supervision
Degree, diploma or certificate (Civil Engineering / Construction discipline)
Minimum 3-5 years of experience in building construction; travel extensively
.
Project planning, drafting, costing, budgeting and tender submissions
Construction site coordination for labour, materials, tools and equipment
Oversee on-site sub-contractors and manage project deadlines
Construction project work quality and site-safety supervision
Degree, diploma or certificate (Civil Engineering / Construction discipline)
Minimum 3-5 years of experience in building construction; travel extensively
.
You can expect a competitive remuneration package with performance bonuses, relocation assistance and employee share options.
.
.
.
Production Manager(Vietnam)
.
.
Responsibilities:
Responsble for the overall factory operation.
To lead the production team to meet the targeted output, quality and delivery schedule.
Improvement in production operating procedures and training of workers.
Work closely with the operation in Malaysia.
.
Responsble for the overall factory operation.
To lead the production team to meet the targeted output, quality and delivery schedule.
Improvement in production operating procedures and training of workers.
Work closely with the operation in Malaysia.
.
Requirements:
Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Food Technology/Nutrition/Dietetics, Business Studies/Administration/Management or equivalent.
Required skill(s): Food processing experience, excellent management skill, work under pressure.
Required language(s): English.
Preferred language(s): Chinese.
At least 5 year(s) of working experience in the related field is required for this position.
Preferably Managers specializing in Manufacturing/Production Operations or equivalent. Job role in Management or Supervisor/Team Lead.
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Food Technology/Nutrition/Dietetics, Business Studies/Administration/Management or equivalent.
Required skill(s): Food processing experience, excellent management skill, work under pressure.
Required language(s): English.
Preferred language(s): Chinese.
At least 5 year(s) of working experience in the related field is required for this position.
Preferably Managers specializing in Manufacturing/Production Operations or equivalent. Job role in Management or Supervisor/Team Lead.
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Interested applicants are invited to apply online or write-in your detailed resume stating personal particulars, qualification, employment history, remuneration expected, contact number and a passport-sized photograph (n.r.) to:
Thong Thye Groundnut Factory Sdn Bhd
Thong Thye Groundnut Factory Sdn Bhd
Lot 445 Mukim Sungei Siput
Rimba Panjang N/V31100
Sungai Siput (N)
Perak
.
.
.
Assistant Manufacturing Manager(Shah Alam, Selangor)
.
Position Responsibilities.
Manage Planning function, Assembly and Store & Warehouse operations to achieve high Overall Equipment Efficiency, high Loading/Delivery Schedule Adherence and high quality performance.
Lead and make process changes on the shopfloor to achieve optimum operational efficiencies.
Implement and introduce Lean manufacturing processes and Six Sigma tools in keeping abreast with Best Practices in the industry.
Effectively manage operating cost so as to achieve an Optimum Operating/Product Unit cost
Manage all Department cost within Budget levels.
Effectively lead, conduct, evaluate and execute cost saving & value re-engineering projects.
Lead and motivate a team of Engineers, Executives, Technicians and Shopfloor Team in delivering Department, Company and ultimately Group objectives.
Manage inventory level and accuracy through effective planning, execution and control.
Lead in transition projects.
Effectively influence and manage shopfloor towards a zero accident and safety conscious environment.
.
Manage Planning function, Assembly and Store & Warehouse operations to achieve high Overall Equipment Efficiency, high Loading/Delivery Schedule Adherence and high quality performance.
Lead and make process changes on the shopfloor to achieve optimum operational efficiencies.
Implement and introduce Lean manufacturing processes and Six Sigma tools in keeping abreast with Best Practices in the industry.
Effectively manage operating cost so as to achieve an Optimum Operating/Product Unit cost
Manage all Department cost within Budget levels.
Effectively lead, conduct, evaluate and execute cost saving & value re-engineering projects.
Lead and motivate a team of Engineers, Executives, Technicians and Shopfloor Team in delivering Department, Company and ultimately Group objectives.
Manage inventory level and accuracy through effective planning, execution and control.
Lead in transition projects.
Effectively influence and manage shopfloor towards a zero accident and safety conscious environment.
.
Position Requirements.
Candidate must possess an Engineering Degree preferably in Process Engineering / Industrial Management or equivalent.
At least 5 years of process engineering / management experience in manufacturing
A strong Lean/Six Sigma practitioner.
Computer literate especially in Microsoft Office application software.
Demonstrate strong leadership skill, an effective team player, good interpersonal communication skill with positive attitude and a demonstrated record of driving results and strong organization skills.
The candidate must be resourceful, able to work independently across functions and at multiple levels.
The candidate must demonstrate strong capability to coach & mentor subordinates.
Able to write and converse with confidence in English with a strong presentation skill.
Applicants should be Malaysian citizens or hold relevant residence status.
Candidate must possess an Engineering Degree preferably in Process Engineering / Industrial Management or equivalent.
At least 5 years of process engineering / management experience in manufacturing
A strong Lean/Six Sigma practitioner.
Computer literate especially in Microsoft Office application software.
Demonstrate strong leadership skill, an effective team player, good interpersonal communication skill with positive attitude and a demonstrated record of driving results and strong organization skills.
The candidate must be resourceful, able to work independently across functions and at multiple levels.
The candidate must demonstrate strong capability to coach & mentor subordinates.
Able to write and converse with confidence in English with a strong presentation skill.
Applicants should be Malaysian citizens or hold relevant residence status.
.
MK Electric (Malaysia) Sdn. Bhd.
Kompleks Perusahaan LTAT,
Jalan Pengapit 15/19
Batu Tiga Industrial Estate
Shah Alam 40000
.
.
.
Operation Manager (Based in China)(Johor)
.
.
Responsibilities:
Responsible for all aspects and functional departments of Manufacturing Operations including Production, Planning, Process engineering and Equipment maintenance.
Lead and direct the Manufacturing team to achieve operational goals in quality, customer service, cost, delivery and output.
Interact and communicate effectively with marketing, Customers, and other departments in the factory to achieve customer satisfaction goals.
Established and maintained high standards of house keeping and safety on a daily basis
Maintain high standard of manufacturing discipline in the operation.
Implement improvement plan and assure proper manufacturing techniques to achieve manufacturing excellence.
.
Responsible for all aspects and functional departments of Manufacturing Operations including Production, Planning, Process engineering and Equipment maintenance.
Lead and direct the Manufacturing team to achieve operational goals in quality, customer service, cost, delivery and output.
Interact and communicate effectively with marketing, Customers, and other departments in the factory to achieve customer satisfaction goals.
Established and maintained high standards of house keeping and safety on a daily basis
Maintain high standard of manufacturing discipline in the operation.
Implement improvement plan and assure proper manufacturing techniques to achieve manufacturing excellence.
.
Requirements:
Degree/Diploma holders with at least 5 to 10 years of working experience specializing in Manufacturing/Production Operations environment (Plastics Injection Molding)
Team Leadership with proven performance in problem-solving and multi –task in a fast-paced, high volume manufacturing environment.
Matured, proactive and independent with a positive and result oriented attitude.
Possess knowledge for ISO 9001 & 14001 and common manufacturing improvement methodology such as 5s, lean manufacturing etc.
Ability to communicate well in English and ability to read and write in mandarin
Preferably to have oversea working experince
Applicants should be Malaysian citizens or hold relevant residence status
Degree/Diploma holders with at least 5 to 10 years of working experience specializing in Manufacturing/Production Operations environment (Plastics Injection Molding)
Team Leadership with proven performance in problem-solving and multi –task in a fast-paced, high volume manufacturing environment.
Matured, proactive and independent with a positive and result oriented attitude.
Possess knowledge for ISO 9001 & 14001 and common manufacturing improvement methodology such as 5s, lean manufacturing etc.
Ability to communicate well in English and ability to read and write in mandarin
Preferably to have oversea working experince
Applicants should be Malaysian citizens or hold relevant residence status
.
V.S. Industry Berhad
18, Jalan Murni 12,
Tmn Perindustrian Murni
Senai 81400.
.
.
Technician(Johor - Tanjung Agas, Muar)
.
.
Responsibilities:
REPAIRING TECHNICIAN
Production process defective analysis & repair
Repairing and troubleshooting of products - Audio Video product, Receiver product
Others job required by the department
.
REPAIRING TECHNICIAN
Production process defective analysis & repair
Repairing and troubleshooting of products - Audio Video product, Receiver product
Others job required by the department
.
AUTO INSERT / SMT TECHNICIAN
Control the machine performance in order to meet dept. KPI
Perform daily checking of machine output quality base on ISO standard
Perform model change according to production schedule
Study & analysis the machine quality issue
Machine maintenance & assist Engineer in machine trouble shooting
Ensure good 5S & house keeping at his/her in charge machine area
Required to perform the KAIZEN activities
Others job which required by the department
.
Control the machine performance in order to meet dept. KPI
Perform daily checking of machine output quality base on ISO standard
Perform model change according to production schedule
Study & analysis the machine quality issue
Machine maintenance & assist Engineer in machine trouble shooting
Ensure good 5S & house keeping at his/her in charge machine area
Required to perform the KAIZEN activities
Others job which required by the department
.
Requirements:
Candidate must possess at least a Certificate in Engineering (Electronic) with min. 1 year working expereince in related field, OR Diploma in Electronics Engineering.
Preferably specializing in Manufacturing/Production Operations or equivalent.
6 Full-Time positions available.
Applicants should be Malaysian citizens.
Candidate must possess at least a Certificate in Engineering (Electronic) with min. 1 year working expereince in related field, OR Diploma in Electronics Engineering.
Preferably specializing in Manufacturing/Production Operations or equivalent.
6 Full-Time positions available.
Applicants should be Malaysian citizens.
.
Pioneer Technology (M) Sdn. Bhd.
No. 5, Tanjung Agas Industrial Area
Muar 84000.
.
.
Design Engineer(Kedah - Sg Petani)
.
.
Requirements:
Diploma/ Degree in Engineering
Minimum 3 years' working experience
Familiar with design software such as AutoCAD and Pro E or Solid works
Posses good command of spoken and written English
Responsible for developing, preparing, updating and compiling all Engineering drawings; to compile all data on machines, equipments, premises, buildings' structure, products, components, tooling and etc and transcribe them to proper Engineering drawing.
To conduct testing protocol and process validation of equipment and material qualification.
To conduct yield/ process/ product improvement
Please submit your application before 1 February 2009 to :
Diploma/ Degree in Engineering
Minimum 3 years' working experience
Familiar with design software such as AutoCAD and Pro E or Solid works
Posses good command of spoken and written English
Responsible for developing, preparing, updating and compiling all Engineering drawings; to compile all data on machines, equipments, premises, buildings' structure, products, components, tooling and etc and transcribe them to proper Engineering drawing.
To conduct testing protocol and process validation of equipment and material qualification.
To conduct yield/ process/ product improvement
Please submit your application before 1 February 2009 to :
Human Resource Department,
UNOMEDICAL SDN BHD (formerly known as Euromedical Industries Sdn Bhd)
Bakar Arang Industrial Estate
08000 Sungai Petani,
Kedah Darul Aman
Tel : 04-455 6116
.
.
