.
.
Process Engineer (NPI Pilot) (Johor - Pasir Gudang)
.
.
Responsibilities:
Monitor NPI Pilot line daily KQCs and yield performance.
Improve and fulfill the internal and external customer’s spec and requirements.
New product/process/SMO run – Monitor new product/process/SMO performance. Fine tune the new process until manufacturing able to run with minimum down time.
Support NPI Development Team on all the experiments run and coordination on all new process setting/new process conversion
Provide briefing and training for NPI operation and production team after new process ready to transfer.
.
Monitor NPI Pilot line daily KQCs and yield performance.
Improve and fulfill the internal and external customer’s spec and requirements.
New product/process/SMO run – Monitor new product/process/SMO performance. Fine tune the new process until manufacturing able to run with minimum down time.
Support NPI Development Team on all the experiments run and coordination on all new process setting/new process conversion
Provide briefing and training for NPI operation and production team after new process ready to transfer.
.
Requirements:
Degree Holder in related Engineering field.
2 years or more work in manufacturing line
Good management skill and process knowledge.
Degree Holder in related Engineering field.
2 years or more work in manufacturing line
Good management skill and process knowledge.
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
.
.
Staff Engineer (Plate Development) (Johor - Pasir Gudang)
.
.
Responsibilities:
Lead technical discussion with suppliers and SJ2 R&D.
Manage the overall project timeline and strategy
Plate Process Development to improve yield, KQCs and cost.
Plate Chemistry Development to improve yield, KQCs and cost
Co-development with 2nd sources suppliers for qualification
Coordinate, follow up technical discussion/task force.
Laboratory study on chemistry characteristic
Training of new process
Yield/Quality/Cost Improvement or troubleshooting task force
.
Lead technical discussion with suppliers and SJ2 R&D.
Manage the overall project timeline and strategy
Plate Process Development to improve yield, KQCs and cost.
Plate Chemistry Development to improve yield, KQCs and cost
Co-development with 2nd sources suppliers for qualification
Coordinate, follow up technical discussion/task force.
Laboratory study on chemistry characteristic
Training of new process
Yield/Quality/Cost Improvement or troubleshooting task force
.
Requirements:
Degree in Chemical Engineering/Chemistry/Resource Chemistry/Material Science
Knowledge of data analysis – SPC, data presentation
Minimum 3 years of plating development experience
Degree in Chemical Engineering/Chemistry/Resource Chemistry/Material Science
Knowledge of data analysis – SPC, data presentation
Minimum 3 years of plating development experience
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
.
.
.
Supervisors (Laser / Injection Moulding / Spray / Assembly / Printing)
(Johor - Johor Bahru - Taman Gembira)
.
.
Responsibilities:
To lead, supervise and motivate a group of work team to meet production plan & shipment schedule
Interface with Engineering, QA and other support function groups to help resolve line problems
Ensure company policies are strictly adhered to by all subordinates
Involve in inventory control, cost down activities, manpower arrangement and material planning
Investigate and settle minor employee complaints and resolve problems in accordance with established policies
Responsible for measuring and appraising subordinates performance through periodic performance appraisal
Ensure and enforce company safety standard requirements both on their subordinates and equipment
.
To lead, supervise and motivate a group of work team to meet production plan & shipment schedule
Interface with Engineering, QA and other support function groups to help resolve line problems
Ensure company policies are strictly adhered to by all subordinates
Involve in inventory control, cost down activities, manpower arrangement and material planning
Investigate and settle minor employee complaints and resolve problems in accordance with established policies
Responsible for measuring and appraising subordinates performance through periodic performance appraisal
Ensure and enforce company safety standard requirements both on their subordinates and equipment
.
Requirements:
Candidate must possess at least a SPM Level
At least 2-3 years of working experience in plastic manufacturing field is advantage
Posses good communication, interpersonal and manpower management skills
Candidate must be willing to work on rotating shift and perform overtime if required
Applicants who are able to start work immediately will be an advantage
Computer literate
.
Candidate must possess at least a SPM Level
At least 2-3 years of working experience in plastic manufacturing field is advantage
Posses good communication, interpersonal and manpower management skills
Candidate must be willing to work on rotating shift and perform overtime if required
Applicants who are able to start work immediately will be an advantage
Computer literate
.
Interested candidates are invited to apply online or forward a detailed resume to below address:
SCM Technologies Sdn. Bhd
No 2, Jalan Riang 21/5,
Taman Gembira,
81200 Johor Bahru,
Johor.
Tel : 07-3333088 / 07- 3382088
Fax: 07-3381557 / 07-3381843
Email : steo@sinco.com.my
.
.
.
Operation Manager (Johor)
.
.
Requirements:
Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Mechanical), Engineering (Industrial), Chemistry, Business Studies/Administration/Management or equivalent.
Required skill(s): experience in manufacturing environment.
Preferred skill(s): six sigma, 5S, lean manufacturing.
Required language(s): Bahasa Malaysia, English
Preferred language(s): Chinese, Japanese
At least 10 year(s) of working experience in the related field is required for this position.
Preferably Managers specializing in Manufacturing/Production Operations or equivalent. Job role in Management or Project Management.
Full-Time positions available.
.
Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Mechanical), Engineering (Industrial), Chemistry, Business Studies/Administration/Management or equivalent.
Required skill(s): experience in manufacturing environment.
Preferred skill(s): six sigma, 5S, lean manufacturing.
Required language(s): Bahasa Malaysia, English
Preferred language(s): Chinese, Japanese
At least 10 year(s) of working experience in the related field is required for this position.
Preferably Managers specializing in Manufacturing/Production Operations or equivalent. Job role in Management or Project Management.
Full-Time positions available.
.
Applicants should be Malaysian citizens or hold relevant residence status.
An attractive and competitive package will be offered to a successful candidate. Interested and qualified candidates are welcome to write in or email with full resume, expected salary and contact number with recent photograph (NR).
An attractive and competitive package will be offered to a successful candidate. Interested and qualified candidates are welcome to write in or email with full resume, expected salary and contact number with recent photograph (NR).
Attention to: Admin Department or
email to:account@engjoo.com .
Send or mail resume to:
Eng Joo Precision Plasyic Sdn Bhd
81, Jalan Idaman 1/3,
Taman Industri Senai,
Senai 81400,
Johor Bahru,
Johor
Malaysia.
.
.
.
CNC Machinist (Johor - Port of Tanjung Pelepas, Johor)
.
.
Responsibilities:
Read and understand drawings, work instructions and bill of materials.
Set up jigs, fixtures and tooling required for the machining.
Operate CNC Turning Machine.
Report self inspection result (Dimension, NDE, Visual)
.
Read and understand drawings, work instructions and bill of materials.
Set up jigs, fixtures and tooling required for the machining.
Operate CNC Turning Machine.
Report self inspection result (Dimension, NDE, Visual)
.
Requirements:
Candidate must possess at least a Professional Certificate in Metal or Precision Machining or equivalent.
At least 3 years working experience & knowledge on large CNC vertical lathe machine operations or metal machining environment.
Capable to perform cutter, workpiece and fixture set-up onto the lathe machine.
Ability to read and understand CNC programming codes
Able to read & interpret technical drawing (Dimension, tolerancing etc)
Good knowledge and application in measuring instrument and inspection methodology for large turning components.
Familiar with Siemens control would be advantageous.
Applicants should be Malaysian citizens or hold relevant residence status; others nationality is welcomed.
Good at oral and written English.
Willing to work on rotating shifts.
.
Candidate must possess at least a Professional Certificate in Metal or Precision Machining or equivalent.
At least 3 years working experience & knowledge on large CNC vertical lathe machine operations or metal machining environment.
Capable to perform cutter, workpiece and fixture set-up onto the lathe machine.
Ability to read and understand CNC programming codes
Able to read & interpret technical drawing (Dimension, tolerancing etc)
Good knowledge and application in measuring instrument and inspection methodology for large turning components.
Familiar with Siemens control would be advantageous.
Applicants should be Malaysian citizens or hold relevant residence status; others nationality is welcomed.
Good at oral and written English.
Willing to work on rotating shifts.
.
GREAT CAREER OPPORTUNITY-
For successful applicant, overseas technical training in USA will be provided within the next 3 months to ensure your successful start-up and rewarding career in Cameron !We are committed to making employment a rewarding experience for both Cameron and the individual Interested candidates are encouraged to apply online or write-in with detailed resume stating academic and career background, current and expected salaries, contact numbers to:
The Human Resource Department
Cameron International Malaysia Systems Sdn Bhd
Lot D33-35, Jalan DPB/6,
Pelabuhan Tanjung Pelepas,
81560 Gelang Patah,
Johor
Tel: 07-5043203 or 07-5043286
Fax: 07-5043119
Email: cimshr@c-a-m.com
Website: www.c-a-m.com
.
.
.
.
Shift Engineer (Manufacturing Engineering) (Johor - Pasir Gudang)
.
.
Responsibilities:
Oversee and Shift sustaining on post polish and cassette cleaning machine.
To meet company Goal for cost and Cumulative Yield.
Manage a group of technicians to sustain day to day outstanding cleanline process and
To monitor, review and feedback Cleanline indicators shiftly to ensure lines stability and reliability.
To monitor, review and trigger cleanline input indicator.
Perform troubleshooting on all cleaning yield, quality & equipment issues that happen during working time.
Coordinate and buy off preventive maintenance and buy off machine conversion.
Audit and lines control.
Work hand in hand with Process and Equipment team for cleaning yield, PPH, quality troubleshooting and improvement activities.
Safety and wet floor control and monitoring.
Operational / Buddy training.
.
Oversee and Shift sustaining on post polish and cassette cleaning machine.
To meet company Goal for cost and Cumulative Yield.
Manage a group of technicians to sustain day to day outstanding cleanline process and
To monitor, review and feedback Cleanline indicators shiftly to ensure lines stability and reliability.
To monitor, review and trigger cleanline input indicator.
Perform troubleshooting on all cleaning yield, quality & equipment issues that happen during working time.
Coordinate and buy off preventive maintenance and buy off machine conversion.
Audit and lines control.
Work hand in hand with Process and Equipment team for cleaning yield, PPH, quality troubleshooting and improvement activities.
Safety and wet floor control and monitoring.
Operational / Buddy training.
.
Requirements:
Degree in Engineering or Applied Sciences
Minimum of 2 years experience as an Industrial/Process Engineer in a manufacturing environment.
Self-motivated and goal oriented and will have the ability to work equally well in a team environment as well as individually
.
Degree in Engineering or Applied Sciences
Minimum of 2 years experience as an Industrial/Process Engineer in a manufacturing environment.
Self-motivated and goal oriented and will have the ability to work equally well in a team environment as well as individually
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
.
.
Shift Leader (Production) (Johor - Pasir Gudang)
.
.
Responsibilities:
Ensure optimization of resources to achieve targeted throughput & yield. On top of operational yield.
Deliver enough supply to media plant. Maintain healthy WIP level.
Ensure production conform to procedures & involve in improvement project
Enforce discipline in workplace. Provide advice/consultation & drive discipline in the shift.
Evaluate team performances, set goals/expectations to the team, provide real time appraisal to production supervisors.
Provide the guidance & be the Mentor to production team. Emphasize on teamwork, build team rapport through team-based activities.
As the facilitator for your shift. Adopt right facilitation techniques in meetings, discussions, problem solving & other team activities.
Seek for team's career growth through proper planning, job opportunities and skill development.
Requirements:
Degree in Engineering, Physic or Chemistry
Minimum 3 years in high volume manufacturing supervisory experience
Exposure in semiconductor and drive industry
Strong supervisory and people management skill
Good communication and interpersonal skills
.
Ensure optimization of resources to achieve targeted throughput & yield. On top of operational yield.
Deliver enough supply to media plant. Maintain healthy WIP level.
Ensure production conform to procedures & involve in improvement project
Enforce discipline in workplace. Provide advice/consultation & drive discipline in the shift.
Evaluate team performances, set goals/expectations to the team, provide real time appraisal to production supervisors.
Provide the guidance & be the Mentor to production team. Emphasize on teamwork, build team rapport through team-based activities.
As the facilitator for your shift. Adopt right facilitation techniques in meetings, discussions, problem solving & other team activities.
Seek for team's career growth through proper planning, job opportunities and skill development.
Requirements:
Degree in Engineering, Physic or Chemistry
Minimum 3 years in high volume manufacturing supervisory experience
Exposure in semiconductor and drive industry
Strong supervisory and people management skill
Good communication and interpersonal skills
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
.
.
.
Engineer (System Project Improvement) (Johor - Pasir Gudang)
.
.
Responsibilities:
Logistic set-up for new product (form-factor, process). For any new product/process introduction in establishing product flow from Plate to FQAP inclusive of parts identification
Product identification & traceability. Mesa Flow Set-up for any new part# / SMO#
Product Mix prevention improvement. Continuous improvement on product mix bullet-proofing (individual product identification, training). Work with respective equipment engineers on providing fail-safe gate for product mix issue.
Lot Integrity. Continuous improvement of setting up and sustaining lot traceability. Involves training of logistics Star role.
Communication to Logistic Star Role on new implementation. Any new implementation of logistics improvement needs to be communicated to the floor via Logistics Star Role.
Cart Support Set-up to ensure it is sufficient to production floor
Process Cassette inventory management and to ensure the sufficient cassette to Production
Purchase/fabricate support tools
In-active lots monitoring
Provide training to production folks for MESA/Logistics related.
.
Logistic set-up for new product (form-factor, process). For any new product/process introduction in establishing product flow from Plate to FQAP inclusive of parts identification
Product identification & traceability. Mesa Flow Set-up for any new part# / SMO#
Product Mix prevention improvement. Continuous improvement on product mix bullet-proofing (individual product identification, training). Work with respective equipment engineers on providing fail-safe gate for product mix issue.
Lot Integrity. Continuous improvement of setting up and sustaining lot traceability. Involves training of logistics Star role.
Communication to Logistic Star Role on new implementation. Any new implementation of logistics improvement needs to be communicated to the floor via Logistics Star Role.
Cart Support Set-up to ensure it is sufficient to production floor
Process Cassette inventory management and to ensure the sufficient cassette to Production
Purchase/fabricate support tools
In-active lots monitoring
Provide training to production folks for MESA/Logistics related.
.
Requirements:
Degree in any engineering and science disciplines.
Minimum 2-3 years working experience in manufacturing environment.
Proactive, assertive with good analytical and communication skills.
Degree in any engineering and science disciplines.
Minimum 2-3 years working experience in manufacturing environment.
Proactive, assertive with good analytical and communication skills.
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
.
.
.
Welding Engineer (Johor - Port of Tanjung Pelepas)
.
.
Responsibilities:
Plan optimum welding process
Provide fixture and tooling support operations
Recommend optimum welding specification, procedures and parameters to achieve desired quality and productivity yield.
Evaluate, select and specify welding equipment features & options
Constantly seeking quantum improvements through technology and process upgrading
.
Plan optimum welding process
Provide fixture and tooling support operations
Recommend optimum welding specification, procedures and parameters to achieve desired quality and productivity yield.
Evaluate, select and specify welding equipment features & options
Constantly seeking quantum improvements through technology and process upgrading
.
Requirements:
Degree / Diploma in Material Science, majoring in either welding or metallurgy with a minimum of 5 years experience in welding.
Experience in oilfield equipment and knowledge in API and NACE standards will be distinctly advantageous.
Possess strong working knowledge of TIG (Automatic), FCAW, SAW operations and structure fabrication
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Degree / Diploma in Material Science, majoring in either welding or metallurgy with a minimum of 5 years experience in welding.
Experience in oilfield equipment and knowledge in API and NACE standards will be distinctly advantageous.
Possess strong working knowledge of TIG (Automatic), FCAW, SAW operations and structure fabrication
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
.
We are committed to making employment a rewarding experience for both Cameron and the individual Interested candidates are encouraged to apply online or write-in with detailed resume stating academic and career background, current and expected salaries, contact numbers to:
The Human Resource Department
Cameron International Malaysia Systems Sdn Bhd
Lot D33-35, Jalan DPB/6,
Pelabuhan Tanjung Pelepas,
81560 Gelang Patah,
Johor
Website: www.c-a-m.com
.
.
.
Engineer (ISO/Documentation/Operational Training) (Johor - Pasir Gudang)
.
.
Responsibilities:
Maintenance and upgrade production ISO/documentation.
Production quality record maintenance.
Work with QA on internal/external ISO audit.
Interface with QA for to improve production ISO control.
Coach production team for ISO related.
Quality incident tracking & improvement activities.
E-vintage.
ISO compliance audit.
.
Maintenance and upgrade production ISO/documentation.
Production quality record maintenance.
Work with QA on internal/external ISO audit.
Interface with QA for to improve production ISO control.
Coach production team for ISO related.
Quality incident tracking & improvement activities.
E-vintage.
ISO compliance audit.
.
Requirements:
Degree in any engineering and science disciplines.
Minimum 2-3 years working experience in manufacturing environment.
Proactive, assertive with good analytical and communication skills.
Experience in ISO quality system will be an advantage.
Degree in any engineering and science disciplines.
Minimum 2-3 years working experience in manufacturing environment.
Proactive, assertive with good analytical and communication skills.
Experience in ISO quality system will be an advantage.
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com
.
.
.
Equipment Engineer (Front End Test) (Johor - Pasir Gudang)
.
.
Responsibilities:
Ensure optimization of resources to achieve targeted Equipment Utilization.
Responsible in new machine installation & set-up
Do Preventive Maintenance Activities and machine utilization
Machine performance monitoring & troubleshooting
Responsible to modify or up-grade the machine base on new technology is required
To maintain the AOI and Lead the improvement activities
Provide safe working environment to team. Enforce WD safety policy.
To meet company Goal for Cost and OEEM.
.
Ensure optimization of resources to achieve targeted Equipment Utilization.
Responsible in new machine installation & set-up
Do Preventive Maintenance Activities and machine utilization
Machine performance monitoring & troubleshooting
Responsible to modify or up-grade the machine base on new technology is required
To maintain the AOI and Lead the improvement activities
Provide safe working environment to team. Enforce WD safety policy.
To meet company Goal for Cost and OEEM.
.
Requirements:
Degree in Engineering or Applied Sciences
Minimum of 2 years experience as an Industrial/Process Engineer in a manufacturing environment.
Excellent Project Management skills; a strong communicator at all levels from Management to technical teams 'on the floor'.
Degree in Engineering or Applied Sciences
Minimum of 2 years experience as an Industrial/Process Engineer in a manufacturing environment.
Excellent Project Management skills; a strong communicator at all levels from Management to technical teams 'on the floor'.
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
.
.
Shift Engineer (Polish Manufacturing Engineering) (Johor - Pasir Gudang)
.
.
Responsibilities:
Oversee and Shift sustaining on polish and grouper area.
To meet company Goal for cost and Cumulative Yield.
Manage a group of technicians to sustain day to day outstanding polish, grouper process and equipment issues and problems.
To monitor, review and feedback Polish indicators shiftly to ensure lines stability and reliability.
To monitor, review and trigger polish input indicator.
Perform troubleshooting on all polish yield, quality & equipment issues that happen during working time.
Coordinate and buy off preventive maintenance and buy off machine conversion.
Audit and lines control.
Work hand in hand with Process and Equipment team for polishing yield, PPH, quality troubleshooting and improvement activities.
Focus on Safety and Environmental Control.
Operational / Buddy training.
.
Oversee and Shift sustaining on polish and grouper area.
To meet company Goal for cost and Cumulative Yield.
Manage a group of technicians to sustain day to day outstanding polish, grouper process and equipment issues and problems.
To monitor, review and feedback Polish indicators shiftly to ensure lines stability and reliability.
To monitor, review and trigger polish input indicator.
Perform troubleshooting on all polish yield, quality & equipment issues that happen during working time.
Coordinate and buy off preventive maintenance and buy off machine conversion.
Audit and lines control.
Work hand in hand with Process and Equipment team for polishing yield, PPH, quality troubleshooting and improvement activities.
Focus on Safety and Environmental Control.
Operational / Buddy training.
.
Requirements:
Degree in Engineering or Applied Sciences
Minimum of 2 years experience as an Industrial/Process Engineer in a manufacturing environment.
Excellent Project Management skills; a strong communicator at all levels from Management to technical teams 'on the floor'.
Self-motivated and goal oriented and will have the ability to work equally well in a team environment as well as individually.
.
Degree in Engineering or Applied Sciences
Minimum of 2 years experience as an Industrial/Process Engineer in a manufacturing environment.
Excellent Project Management skills; a strong communicator at all levels from Management to technical teams 'on the floor'.
Self-motivated and goal oriented and will have the ability to work equally well in a team environment as well as individually.
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
.
.
Engineer (Plating Manufacturing Engineering) (Johor - Pasir Gudang)
.
.
Responsibilities:
Sustains and troubleshoot all SS module, Chilled water Plumbing and Plating line general -related issues on Plating Line
Sustains and troubleshoot of JO1 Plating Mc-leod Controllers units
Coordinates PM activities for both Plumbing and Mc-leod related issues at Plating line.
Taking care of all pumps and motor system at glycol and nickel circulation at Plating.
Performs Engineering improvement activities to reduce equipment downtime and yield loss related to Plumbing and Mc-leod failure in Plating Line.
Supports in cost reduction and yield improvement activities in Plating
Spare parts management system
Coordinates daily job activities with technicians
Taking care of all plumbing related issues at Stripline.
Taking care of other support equipment areas at plumbing related issue- waste collection system(PNS), Chemical Kitche(CK),Plumbing misc electrical and Standalone/Premix Station
.
Sustains and troubleshoot all SS module, Chilled water Plumbing and Plating line general -related issues on Plating Line
Sustains and troubleshoot of JO1 Plating Mc-leod Controllers units
Coordinates PM activities for both Plumbing and Mc-leod related issues at Plating line.
Taking care of all pumps and motor system at glycol and nickel circulation at Plating.
Performs Engineering improvement activities to reduce equipment downtime and yield loss related to Plumbing and Mc-leod failure in Plating Line.
Supports in cost reduction and yield improvement activities in Plating
Spare parts management system
Coordinates daily job activities with technicians
Taking care of all plumbing related issues at Stripline.
Taking care of other support equipment areas at plumbing related issue- waste collection system(PNS), Chemical Kitche(CK),Plumbing misc electrical and Standalone/Premix Station
.
Requirements:
Degree in Mechanical Engineering or Electronics
1 to 2 years working experience in a manufacturing environment will be an added advantage
Knowledge in mechanical drawing
.
Degree in Mechanical Engineering or Electronics
1 to 2 years working experience in a manufacturing environment will be an added advantage
Knowledge in mechanical drawing
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com
.
.
.
Production Supervisor/Sr. Supervisor (Assembly)(Johor - Senai)
.
.
Responsibilities:
To ensure the production target is achieved.
To generate the output report.
To plan and control the manpower.
To maintain 5S in production floor.
To increase operators' productivity.
.
To ensure the production target is achieved.
To generate the output report.
To plan and control the manpower.
To maintain 5S in production floor.
To increase operators' productivity.
.
Requirements:
Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in any field.
At least 3 year(s) of working experience in the related field is required for this position.
Applicants must be willing to work in Senai.
Applicants should be Malaysian citizens or hold relevant residence status.
Preferably senior executives specializing in Manufacturing/Production Operations or equivalent.
Full-Time positions available.
Prefer candidate with experience in product assembly manufacturing.
Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in any field.
At least 3 year(s) of working experience in the related field is required for this position.
Applicants must be willing to work in Senai.
Applicants should be Malaysian citizens or hold relevant residence status.
Preferably senior executives specializing in Manufacturing/Production Operations or equivalent.
Full-Time positions available.
Prefer candidate with experience in product assembly manufacturing.
.
Interested candidates are invited to apply online / write / fax-in with full resume stating personal and career history, current and expected salary and contact number to:
The Recruitment Division
V.S. INDUSTRY BERHAD
PTD 86556, Jalan Murni 12,
Murni Senai Industrial Estate,
81400 Senai,
Johor,
Malaysia.
Tel: 607 - 597 3399 Fax: 607 - 599 1752
Web Site : http://www.vs-i.com
E-mail:recruit@vs-i.com
.
.
.
SHIFT SUPERVISOR (Perak - Simpang Pulai)
.
.
Responsibilities:
To lead a group of operators to meet their daily output, yield and quality
To solve any arising problems on quality and machine
Actively involve in continuous improvement programs such as cycle time improvement, cost reduction, down-time reduction and promotes productivity programs
.
To lead a group of operators to meet their daily output, yield and quality
To solve any arising problems on quality and machine
Actively involve in continuous improvement programs such as cycle time improvement, cost reduction, down-time reduction and promotes productivity programs
.
Requirements:
Candidate must possess at least Bachelor's Degree or Diploma in any discipline
Must have good supervisory and leadership skills
Must be able to work on 12-hour rotating shifts
Those who have working experience in supervisory level in a related industry will be an added advantage
Applicants should be Malaysian citizens and willing to work at Ipoh
Fresh graduates are encouraged to apply
.
Candidate must possess at least Bachelor's Degree or Diploma in any discipline
Must have good supervisory and leadership skills
Must be able to work on 12-hour rotating shifts
Those who have working experience in supervisory level in a related industry will be an added advantage
Applicants should be Malaysian citizens and willing to work at Ipoh
Fresh graduates are encouraged to apply
.
Interested applicants are invited to apply online / fax / write-in with a comprehensive resume to the address below:
HUMAN RESOURCE DEPARTMENT
UNISEM (M) BERHAD
1 Persiaran Pulai Jaya 9
Kawasan Perindustrian Pulai Jaya
31300 Ipoh Perak
Tel : 05-3572800 Fax : 05-3572100
.
.
.
Process Engineer - Latex Technologist(Perak - Kamunting)
.
.
Responsibilities:
Determine operations required to produce products and develops processes to ensure quality, cost, efficiency requirements are met.
Troubleshoot problems with production and recommend corrective and preventive actions.
.
Determine operations required to produce products and develops processes to ensure quality, cost, efficiency requirements are met.
Troubleshoot problems with production and recommend corrective and preventive actions.
.
Requirements:
Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Mining/Mineral), Engineering (Material Science), Engineering (Chemical) or equivalent.
At least 5 year(s) of working experience in the related field is required for this position.
Preferably Senior Executives specializing in Manufacturing/Production Operations or equivalent. Job role in Process Engineer or equivalent.
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
Interested applicants are invited to apply online or write-in your detailed resume stating personal particulars, qualification, employment history, remuneration expected, contact number and a passport-sized photograph (n.r.) to:
.
Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Mining/Mineral), Engineering (Material Science), Engineering (Chemical) or equivalent.
At least 5 year(s) of working experience in the related field is required for this position.
Preferably Senior Executives specializing in Manufacturing/Production Operations or equivalent. Job role in Process Engineer or equivalent.
Full-Time positions available.
Applicants should be Malaysian citizens or hold relevant residence status.
Interested applicants are invited to apply online or write-in your detailed resume stating personal particulars, qualification, employment history, remuneration expected, contact number and a passport-sized photograph (n.r.) to:
.
Rusch Manufacturing Sdn Bhd
P.O. Box 2834600 Kamunting
Perak
For more information, you may visit us at :- http://www.teleflexmedical.com
.
.
.
Engineer (Development) (Johor - Pasir Gudang)
.
.
Responsibilities:
Act as technical support of engineering in normal shift to meet company and departmental goals of Equipment Utilization, Operational Yield and Product Quality
Involve in day to day monitor, sustain and resolve Yield, Utilization and Product Quality issues through common/special causes analysis, effective PM, FMEA and continually improvement activities
Provide training to production folks on Equipment Operating Procedure and basic troubleshooting guideline
Lead in Equipment problem solving activities and Plating line recovery plan
Coordination of production line idling and start-up activities
Involve, participate and lead in Engineering improvement activities
Identify and perform part/machine rebuilt opportunity
Update documentation and e-Drawing
Follow Clean Room protocol
To lead, support, manage, coach and develop a Team of Technician in order to meet company goals
.
Act as technical support of engineering in normal shift to meet company and departmental goals of Equipment Utilization, Operational Yield and Product Quality
Involve in day to day monitor, sustain and resolve Yield, Utilization and Product Quality issues through common/special causes analysis, effective PM, FMEA and continually improvement activities
Provide training to production folks on Equipment Operating Procedure and basic troubleshooting guideline
Lead in Equipment problem solving activities and Plating line recovery plan
Coordination of production line idling and start-up activities
Involve, participate and lead in Engineering improvement activities
Identify and perform part/machine rebuilt opportunity
Update documentation and e-Drawing
Follow Clean Room protocol
To lead, support, manage, coach and develop a Team of Technician in order to meet company goals
.
Requirements:
Degree in Engineering or Equivalent
1 to 2 years working experience in a manufacturing environment will be an added advantage
Good team player, shows a high degree of resourcefulness and highly proactive.
Knowledge in PLC and control system is an added advantage.
.
Degree in Engineering or Equivalent
1 to 2 years working experience in a manufacturing environment will be an added advantage
Good team player, shows a high degree of resourcefulness and highly proactive.
Knowledge in PLC and control system is an added advantage.
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
.
.
Engineer (Process) (Johor - Pasir Gudang)
.
.
Responsibilities:
Act as technical support of engineering in normal shift to meet company and departmental goals of
o Equipment Utilization
o Operational Yield
o Product Quality
Involve in day to day monitor, sustain and resolve Yield, Utilization and Product Quality issues through common/special causes analysis, FMEA and continually improvement activities
Provide training to production folks on Process Control, SOP and product quality issues
Lead in Process Control problem solving activities and Plating line recovery plan
Coordination of production line idling and start-up activities
Involve, participate and lead in Engineering improvement activities
Update documentation
Follow Clean Room protocol
To lead, support, manage, coach and develop a Team of Technician in order to meet company goals
.
Act as technical support of engineering in normal shift to meet company and departmental goals of
o Equipment Utilization
o Operational Yield
o Product Quality
Involve in day to day monitor, sustain and resolve Yield, Utilization and Product Quality issues through common/special causes analysis, FMEA and continually improvement activities
Provide training to production folks on Process Control, SOP and product quality issues
Lead in Process Control problem solving activities and Plating line recovery plan
Coordination of production line idling and start-up activities
Involve, participate and lead in Engineering improvement activities
Update documentation
Follow Clean Room protocol
To lead, support, manage, coach and develop a Team of Technician in order to meet company goals
.
Requirements:
Degree in Engineering or Equivalent
Min 1 to 2 years experience in a manufacturing environment with hands-on knowledge on process & yield troubleshooting
Knowledge in SPC & 6-Sigma is advantageous
Degree in Engineering or Equivalent
Min 1 to 2 years experience in a manufacturing environment with hands-on knowledge on process & yield troubleshooting
Knowledge in SPC & 6-Sigma is advantageous
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
.
.
Engineer (Plate Line Hoist) (Johor - Pasir Gudang)
.
.
Responsibilities:
Sustains and troubleshoot Hoist electrical/mechanical -related issues on Plating Line and Stripline
Sustains and troubleshoot any issues related to electrical pump motor and rack rotation monitoring system
Coordinates PM activities on Plating Line and Stripline
Performs Engineering improvement activities to reduce equipment downtime and yield loss related to hoist failure in Plating Line/Stripline and failure of rack rotation system
Supports in cost reduction and yield improvement activities in Plating
Spare parts management system
Coordinates daily job activities with technicians
.
Sustains and troubleshoot Hoist electrical/mechanical -related issues on Plating Line and Stripline
Sustains and troubleshoot any issues related to electrical pump motor and rack rotation monitoring system
Coordinates PM activities on Plating Line and Stripline
Performs Engineering improvement activities to reduce equipment downtime and yield loss related to hoist failure in Plating Line/Stripline and failure of rack rotation system
Supports in cost reduction and yield improvement activities in Plating
Spare parts management system
Coordinates daily job activities with technicians
.
Requirements:
Degree in Electrical & Electronic Engineering
1 to 2 years working experience in a manufacturing environment will be an added advantage
Knowledge in electrical drawing and PLC wiring
Hands-on knowledge in PLC/SCADA system is considered an advantage
.
Degree in Electrical & Electronic Engineering
1 to 2 years working experience in a manufacturing environment will be an added advantage
Knowledge in electrical drawing and PLC wiring
Hands-on knowledge in PLC/SCADA system is considered an advantage
.
WD Media (Formerly known as Komag USA (Malaysia) Sdn.)
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
Bayan Lepas FTZ Phase 3 & 4,
11900 Penang .
Tel: 604-6439449
Website: http://www.wdc.com.
.
.
.
Assistant Production Manager (Johor)
.
.
Requirements:
Diploma / Degree in Metal Fabrication / Tool & Die / Welding or equivalent.
Minimum 5 years working experience in steel and concrete works fabrication is preferred.
Supervise, co-ordinate, and control all production activities & personnel to achieve management target.
Ensure manpower optimization and minimize material wastage.
Assist in the planning of production schedule, manpower, process flow and quality plans.
Ensure consistency in good house-keeping practices in the production.
To be based in Johor.
.
Diploma / Degree in Metal Fabrication / Tool & Die / Welding or equivalent.
Minimum 5 years working experience in steel and concrete works fabrication is preferred.
Supervise, co-ordinate, and control all production activities & personnel to achieve management target.
Ensure manpower optimization and minimize material wastage.
Assist in the planning of production schedule, manpower, process flow and quality plans.
Ensure consistency in good house-keeping practices in the production.
To be based in Johor.
.
Interested candidates are requested to email with detailed resume stating current and expected salary, contact number and recent passport sized photograph (n.r.) to:
Senior Manager
Finance / HR & Admin The Sanderson Design Group (M) Sdn Bhd (725599-X)
A-3-3 Unit 3, Block A,
Mines Waterfront Business Park,
No. 3, Jalan Tasik,
Mines Resort City,
43300 Seri Kembangan,
Selangor
E-mail: hr@sgkl.com.my
.
.
.
Production Supervisor (Johor)
.
.
Requirements:
Certificate / Diploma in Metal Fabrication / Tool & Die / Welding or equivalent
Minimum 3 years working experience in steel and concrete works fabrication is preferred.
Maintain production schedules and supervise the production process.
To ensure the production target is achieved.
Direct, control and motivate production staff.
Provide timely production and other performance related reports to the superior as required.
To be based in Johor.
.
Certificate / Diploma in Metal Fabrication / Tool & Die / Welding or equivalent
Minimum 3 years working experience in steel and concrete works fabrication is preferred.
Maintain production schedules and supervise the production process.
To ensure the production target is achieved.
Direct, control and motivate production staff.
Provide timely production and other performance related reports to the superior as required.
To be based in Johor.
.
Interested candidates are requested to email with detailed resume stating current and expected salary, contact number and recent passport sized photograph (n.r.) to:
Senior Manager Finance / HR & Admin
The Sanderson Design Group (M) Sdn Bhd (725599-X)
A-3-3 Unit 3, Block A,
Mines Waterfront Business Park,
No. 3, Jalan Tasik,
Mines Resort City,
43300 Seri Kembangan,
Selangor
E-mail: hr@sgkl.com.my
.
.
.
Production Manager (Johor)
.
.
Requirements:
Degree in Metal Fabrication / Tool & Die / Welding or equivalent.
Minimum 8 years relevant working experience in steel and concrete works factory is preferred.
To establish quality standard, standard operating procedures and scheduling of work to meet agreed production plan.
To manage and control production as to ensure the cost expenses under budget.
Responsible for optimum utilization of manpower, machineries and materials.
To monitor and improve production processes, identify problems and take appropriate action for correction & prevention.
Knowledgeable on requirements of factory safety and statutory compliance requirements.
To be based in Johor.
.
Degree in Metal Fabrication / Tool & Die / Welding or equivalent.
Minimum 8 years relevant working experience in steel and concrete works factory is preferred.
To establish quality standard, standard operating procedures and scheduling of work to meet agreed production plan.
To manage and control production as to ensure the cost expenses under budget.
Responsible for optimum utilization of manpower, machineries and materials.
To monitor and improve production processes, identify problems and take appropriate action for correction & prevention.
Knowledgeable on requirements of factory safety and statutory compliance requirements.
To be based in Johor.
.
Interested candidates are requested to email with detailed resume stating current and expected salary, contact number and recent passport sized photograph (n.r.) to:
Senior Manager Finance / HR & Admin
The Sanderson Design Group (M) Sdn Bhd (725599-X)
A-3-3 Unit 3, Block A,
Mines Waterfront Business Park,
No. 3, Jalan Tasik,
Mines Resort City,
43300 Seri Kembangan,
Selangor
E-mail: hr@sgkl.com.my
.
.
.
