Engineer cum Production Executive (Selangor - Bandar Teknologi Kajang)
Requirements:
Candidate must possess at least a Professional Certificate, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Chemical/Polymer/Material Science), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical), Engineering (Electrical/Electronic), Business Studies/Administration/Management or equivalent.
At least 1 year(s) of working experience in the related field is required for this position.
Preferably Junior Executives specializing in Manufacturing/Production Operations or equivalent. Job role in Process Engineer or Management.
2 Full-Time positions available.
Fresh graduates are also encourage to apply.
Able to work with minimum supervision and result oriented.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Requirements:
Candidate must possess at least a Professional Certificate, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Chemical/Polymer/Material Science), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical), Engineering (Electrical/Electronic), Business Studies/Administration/Management or equivalent.
At least 1 year(s) of working experience in the related field is required for this position.
Preferably Junior Executives specializing in Manufacturing/Production Operations or equivalent. Job role in Process Engineer or Management.
2 Full-Time positions available.
Fresh graduates are also encourage to apply.
Able to work with minimum supervision and result oriented.
Applicants should be Malaysian citizens or hold relevant residence status.
.
Ecotech Systems Global Sdn Bhd
No1, JLN P2/19, Section 2,
Bandar Teknologi Kajang,
Kajang 43500.
Tel: 012-3439853 and 0162025108
Directline: 03-87231108
.
.
.
Technician/ Technical Specialist – Equipment/ Process(Penang - Bayan Lepas)
.
.
Responsibilities:
You will be placed in either one of the below areas in this Organisation:-
Equipment/ Process/ Moulding Tooling / Plastic Injection Molding
To conduct Preventive/ Predictive Maintenance of equipments to minimize equipment downtime.
Familiar with pneumatics systems/diagrams, PLCs programming, sensors, servo motors etc.
Familiar in performing preventive and predictive maintenance on high end precision machines and equipments.
Able to perform setting up of new machines, upgrading, troubleshooting.
To coordinate with other department/ vendors for equipment improvement.
Work independently, self-motivated, resourceful, committed and also a team player.
To maintain equipment down time according to the goal.
To optimize equipment performance to hit production loading
Participate on project works with Engineers.
.
You will be placed in either one of the below areas in this Organisation:-
Equipment/ Process/ Moulding Tooling / Plastic Injection Molding
To conduct Preventive/ Predictive Maintenance of equipments to minimize equipment downtime.
Familiar with pneumatics systems/diagrams, PLCs programming, sensors, servo motors etc.
Familiar in performing preventive and predictive maintenance on high end precision machines and equipments.
Able to perform setting up of new machines, upgrading, troubleshooting.
To coordinate with other department/ vendors for equipment improvement.
Work independently, self-motivated, resourceful, committed and also a team player.
To maintain equipment down time according to the goal.
To optimize equipment performance to hit production loading
Participate on project works with Engineers.
.
Requirements:
Possessed minimum Certificate/ Diploma/ Adv. Diploma in Engineering, Mechanical, Electromechanical, Sciences or related from Polytechnics, Universities or other recognized higher learning institutions. Fresh candidates will be considered.
Having 1-3 years of similar working experience with high precision robotics equipments, plastics injection molding machines, molding equipments in high volume manufacturing environment is an added advantage.
Familiar with pneumatics, sensors, maintenance, upgrading, trouble shooting of equipments are needed
Familiar with engineering date collection and maintenance of SPC, FMEA, DOE or others is advantage but not a must.
Willing to work on 3 rotation shift in a clean room environment.
Able to understand and communicate in good English.
Applicants should be Malaysian citizens or hold relevant residence status.
Possessed minimum Certificate/ Diploma/ Adv. Diploma in Engineering, Mechanical, Electromechanical, Sciences or related from Polytechnics, Universities or other recognized higher learning institutions. Fresh candidates will be considered.
Having 1-3 years of similar working experience with high precision robotics equipments, plastics injection molding machines, molding equipments in high volume manufacturing environment is an added advantage.
Familiar with pneumatics, sensors, maintenance, upgrading, trouble shooting of equipments are needed
Familiar with engineering date collection and maintenance of SPC, FMEA, DOE or others is advantage but not a must.
Willing to work on 3 rotation shift in a clean room environment.
Able to understand and communicate in good English.
Applicants should be Malaysian citizens or hold relevant residence status.
.
B Braun Medical Industries Sdn Bhd
Bayan Lepas Free Industrial Zone
PO Box 880 Bayan Lepas
10810.
.
.
Factory Manager(Johor)
.
.
Responsibilities:
To lead & motivate a sizeable staff strength to achieve work targets in a fast-paced environment
To oversee, plan, organise and manage the overall factory's operational activities
To initial and implement actions to improve product quality, productivity, delivery and cost
To allocate and ensure optimization of available resources such as materials, equipments, facilities & workforce to maintain cost effectiveness
Monitor and manage rejects, rework and inventory levels to achieve forecasted targets
Work closely with each functional department to achieve customer satisfaction through production quality and timely deliveries
Lead the continuous improvement of operational efficiency and quality
Drive cost reduction by improving production yield and reducing manpower & wastages
Implement 5S, overview safety and regulatory requirements for the plant
.
To lead & motivate a sizeable staff strength to achieve work targets in a fast-paced environment
To oversee, plan, organise and manage the overall factory's operational activities
To initial and implement actions to improve product quality, productivity, delivery and cost
To allocate and ensure optimization of available resources such as materials, equipments, facilities & workforce to maintain cost effectiveness
Monitor and manage rejects, rework and inventory levels to achieve forecasted targets
Work closely with each functional department to achieve customer satisfaction through production quality and timely deliveries
Lead the continuous improvement of operational efficiency and quality
Drive cost reduction by improving production yield and reducing manpower & wastages
Implement 5S, overview safety and regulatory requirements for the plant
.
Requirements:
Degree / Diploma holder in Mechanical engineering, Chemical Engineering, manufacturing management or other related engineering field
A minimum of Five years' experience in managerial position handling production/operations management, inventory control, and quality assurance required
Preferably Managers with sound technical knowledge, specializing in Plastic Manufacturing/Production Operations and familiar with its secondary process in areas like laser, printing, tempo printing, spray, degating etc.,
Proven leadership and man-management skills, analytical and planning abilities, strong business focus and solution oriented approach
Familiar with Quality and Environment management requirements, well versed in ISO 9001 & 14000
Result oriented, possess problem solving skills, strong analytical skills and a good team player
.
Degree / Diploma holder in Mechanical engineering, Chemical Engineering, manufacturing management or other related engineering field
A minimum of Five years' experience in managerial position handling production/operations management, inventory control, and quality assurance required
Preferably Managers with sound technical knowledge, specializing in Plastic Manufacturing/Production Operations and familiar with its secondary process in areas like laser, printing, tempo printing, spray, degating etc.,
Proven leadership and man-management skills, analytical and planning abilities, strong business focus and solution oriented approach
Familiar with Quality and Environment management requirements, well versed in ISO 9001 & 14000
Result oriented, possess problem solving skills, strong analytical skills and a good team player
.
Interested candidates are invited to apply on line or forward a detailed resume to below email address:
SCM Technologies Sdn. Bhd
No 2, Jalan Riang 21/5,
Taman Gembira,
81200 Johor Bahru,
Johor.
Email address : steo@sinco.com.my
.
.
.
Production Assistant Manager(Johor - Johor Bahru)
.
.
Responsibilities:
To schedule working timetable for a group of workers such as supervisors, technicians & operators.
To monitor the workers attitude and discipline.
To ensure the monthly target set is achieved, the machinery/equipment fully running and the product delivered according to schedule.
To do machine setting and confirm the machine condition before running new product and do minor repairing if the machine have faulty.
To control the expenses related to manufacturing activity, reduce the material waste and reduce in-process reject.
To educate subordinate with latest information and able to do consultation for problem subordinate.
.
To schedule working timetable for a group of workers such as supervisors, technicians & operators.
To monitor the workers attitude and discipline.
To ensure the monthly target set is achieved, the machinery/equipment fully running and the product delivered according to schedule.
To do machine setting and confirm the machine condition before running new product and do minor repairing if the machine have faulty.
To control the expenses related to manufacturing activity, reduce the material waste and reduce in-process reject.
To educate subordinate with latest information and able to do consultation for problem subordinate.
.
Requirements:
Candidate must possess at least a Diploma or Degree (or equivalent) in Engineering (Mechanical/Mechatronic) or Engineering (Electrical/Electronic) and above.
Required skill(s): Microsoft Office, Excel, Word, Power Point.
Required language(s): Bahasa Malaysia, English
Advantage language(s): Chinese (Mandarin).
At least 10 year(s) of working experience in the Manufacturing/Production Operations field is required for this position.
Able to work independently (with minimum supervision) or in group task.
Able to work under pressure.
Applicants must have the Leadership skill.
Have the knowledge in ISO9001, ISO14001 and QCC Activity.
Has the experiences as ISO9001 or ISO14001 Internal Auditor.
Applicants must be willing to work in Johor Bahru.
Applicants should be Malaysian citizens.
Full-Time positions.
Photo to be attached.
.
Candidate must possess at least a Diploma or Degree (or equivalent) in Engineering (Mechanical/Mechatronic) or Engineering (Electrical/Electronic) and above.
Required skill(s): Microsoft Office, Excel, Word, Power Point.
Required language(s): Bahasa Malaysia, English
Advantage language(s): Chinese (Mandarin).
At least 10 year(s) of working experience in the Manufacturing/Production Operations field is required for this position.
Able to work independently (with minimum supervision) or in group task.
Able to work under pressure.
Applicants must have the Leadership skill.
Have the knowledge in ISO9001, ISO14001 and QCC Activity.
Has the experiences as ISO9001 or ISO14001 Internal Auditor.
Applicants must be willing to work in Johor Bahru.
Applicants should be Malaysian citizens.
Full-Time positions.
Photo to be attached.
.
Interested candidates are encouraged to apply online or submit your full resume to:
Shinyei Kaisha Electronics (M) Sdn Bhd
No. 313, Lot 2557,
6 1/2 m.s.,
Jalan Skudai
81200 Johor Bahru
Johor
Tel: 07 - 2351459 Fax: 07 - 2386022
