ASSISTANT ENGINEER
Location : Nilai / Malacca
.
Responsibilities:
Controlling and supervising worker
Conduct production study to improve the efficiency & fabric quality
Ensure all worker performing the job following the standard operation procedure & safety working procedure
Conduct a meeting with all worker on information, education & training
Maintain the working environment safety, healthy, clean and tidy
Response on talking corrective and /or preventive action based on abnormality report.
.
Responsibilities:
Controlling and supervising worker
Conduct production study to improve the efficiency & fabric quality
Ensure all worker performing the job following the standard operation procedure & safety working procedure
Conduct a meeting with all worker on information, education & training
Maintain the working environment safety, healthy, clean and tidy
Response on talking corrective and /or preventive action based on abnormality report.
.
Requirements:
Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Material Science), Engineering (Chemical), Engineering (Mechanical), Engineering (Electrical/Electronic), Chemistry, Others or equivalent.
Required language(s): English, Bahasa Malaysia
Applicants must be willing to work in NILAI/MALACCA.
Applicants should be Malaysian citizens or hold relevant residence status.
Fresh graduates/Entry level applicants are encouraged to apply.
Full-Time positions available.
Accommodation provided.
.
Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Material Science), Engineering (Chemical), Engineering (Mechanical), Engineering (Electrical/Electronic), Chemistry, Others or equivalent.
Required language(s): English, Bahasa Malaysia
Applicants must be willing to work in NILAI/MALACCA.
Applicants should be Malaysian citizens or hold relevant residence status.
Fresh graduates/Entry level applicants are encouraged to apply.
Full-Time positions available.
Accommodation provided.
.
Call Ms Vivian at 03-2031 6000 ext 203/ fax to 03-2070 4196 /
Write
Human Resource Section
Recron (Malaysia) Sdn Bhd (781769-K)
Level 9, Wisma Goldhill,
67, Jalan Raja Chulan
50200 Kuala Lumpur
Malaysia
Website: www.recronmalaysia.com
.
Website: www.recronmalaysia.com
.
.
.
MAINTENANCE ENGINEERS
Location : Pahang - Kuantan
.
.
Responsibilities:
Ensure that maintenance tasks are complied and the equipments are running properly.
Highly skilled in machine troubleshooting
.
Ensure that maintenance tasks are complied and the equipments are running properly.
Highly skilled in machine troubleshooting
.
Requirements:
Candidate must have 3 to 5 years engineering knowledge and maintenance experience preferable in HDPE processing or other plastics.
Knowledge in blow moulding or injection moulding would be an advantage.
Must posses a Degree either in Mechanical or Electrical engineering.
Possess hands on skills and experience in handling Electrical and Mechanical equipments.
Technical experience in Pneumatic, Hydraulic & Facility Machinery is a must.
Good knowledge of IT systems and PLC’s
Applicants should be Malaysian citizens or hold relevant residence status.
.
Candidate must have 3 to 5 years engineering knowledge and maintenance experience preferable in HDPE processing or other plastics.
Knowledge in blow moulding or injection moulding would be an advantage.
Must posses a Degree either in Mechanical or Electrical engineering.
Possess hands on skills and experience in handling Electrical and Mechanical equipments.
Technical experience in Pneumatic, Hydraulic & Facility Machinery is a must.
Good knowledge of IT systems and PLC’s
Applicants should be Malaysian citizens or hold relevant residence status.
.
Interested candidates are invited to APPLY ONLINE by submitting a detailed resume together with current & expected salaries(Only shortlisted candidates will be notified for interview)For more information, please visit us at www.logoplaste.com
.
.
.
.
Engineering/Operations Manager
Location : Penang - Juru, Bukit Mertajam
.
.
Responsibilities:
Lead and manage a team of Staff (supervisors/executives, engineers, etc) to ensure compliance of processes and operational procedures in accordance to documented specifications and quality expectations;
Ensure all products are well supported with the right work methods, materials, machines in line with the right available technology so as to ensure maximum yield and quality;
Take lead in analyzing and trouble-shooting any product related abnormalities and failures that affects the form, fit or function of the products with the right corrective actions and solution;
Establish and implement the use of SPC, FMEA, QC tools, Process Control Plans and CPk studies to ensure good process and product quality management;
Provide good leadership to motivate and empower the team to achieve set KPIs and Goals;
Take lead and champion continuous improvement activities in the areas of quality, cost and delivery;
Search for breakthrough ideas on yield and quality improvements through the use of technology, new methods, superior materials and equipments;
Interface with both suppliers and customers to ensure all product and process related issues are addressed and resolved so as to maintain stability and reliability;
.
Lead and manage a team of Staff (supervisors/executives, engineers, etc) to ensure compliance of processes and operational procedures in accordance to documented specifications and quality expectations;
Ensure all products are well supported with the right work methods, materials, machines in line with the right available technology so as to ensure maximum yield and quality;
Take lead in analyzing and trouble-shooting any product related abnormalities and failures that affects the form, fit or function of the products with the right corrective actions and solution;
Establish and implement the use of SPC, FMEA, QC tools, Process Control Plans and CPk studies to ensure good process and product quality management;
Provide good leadership to motivate and empower the team to achieve set KPIs and Goals;
Take lead and champion continuous improvement activities in the areas of quality, cost and delivery;
Search for breakthrough ideas on yield and quality improvements through the use of technology, new methods, superior materials and equipments;
Interface with both suppliers and customers to ensure all product and process related issues are addressed and resolved so as to maintain stability and reliability;
.
Requirements:
Minimum degree in any Technical/Engineering discipline. Those with Mechanical Engineering or Mechatronics background will be an added advantage;
At least minimum 5 years of work experience and exposure in related industry is preferred;
Must have good communication, people interaction and leadership skills;
Able to adapt fast and be flexible to environmental work culture and conditions;
Good people management skills with task and results-oriented approach will be preferred;
.
Minimum degree in any Technical/Engineering discipline. Those with Mechanical Engineering or Mechatronics background will be an added advantage;
At least minimum 5 years of work experience and exposure in related industry is preferred;
Must have good communication, people interaction and leadership skills;
Able to adapt fast and be flexible to environmental work culture and conditions;
Good people management skills with task and results-oriented approach will be preferred;
.
EKO Metal Industries Sdn BhdLot 667 & 668 Juru Bukit Mertajam 14000.
.
.
.
.
Mechanical Design Engineer
Location : Selangor
.
Responsibilities:
Planning, design and deevelop with customers' full systems layout, specifications, engineering solutions (using CAD).
Design/ Development of Material Handling machine and systems and process to meet customers spec's, machine functionality and productions manufacturability and cost.
Machine design concept and engineering calculations.
.
Requirements:
Candidate must possess at least a DEGREE/ DIPLOMA in Mechanical Engineering or equivalent. Above 5 years related working experience in the field of Factory Automation or equivalent.
Possess creative flair for machine designs, well balanced by sound engineering capability.
Able to plan and managed multi-disciplined site activities within specified time frame and technical specifications.
Exposure preferably in manufacturing assembly, fabrication works, quality control and installation.
Good analytical skills: specification, process, capacity, cost and quality tool.
Matured, self-motivated and confident team player with ability to work in a fast-paced and dynamic environment.
Independent with high level of professionalism.
Full-Time positions available.
.
.
Responsibilities:
Planning, design and deevelop with customers' full systems layout, specifications, engineering solutions (using CAD).
Design/ Development of Material Handling machine and systems and process to meet customers spec's, machine functionality and productions manufacturability and cost.
Machine design concept and engineering calculations.
.
Requirements:
Candidate must possess at least a DEGREE/ DIPLOMA in Mechanical Engineering or equivalent. Above 5 years related working experience in the field of Factory Automation or equivalent.
Possess creative flair for machine designs, well balanced by sound engineering capability.
Able to plan and managed multi-disciplined site activities within specified time frame and technical specifications.
Exposure preferably in manufacturing assembly, fabrication works, quality control and installation.
Good analytical skills: specification, process, capacity, cost and quality tool.
Matured, self-motivated and confident team player with ability to work in a fast-paced and dynamic environment.
Independent with high level of professionalism.
Full-Time positions available.
.
If your profile meets the above criteria and are looking for a dynamic action-packed career, please apply on-line confidentially or write/fax your complete details to:
Human Resource Department
Human Resource Department
CHENG HUA ENGINEERING WORKS SDN BHD (30508-W)
Lot 10383 / 10384,
Jalan Laksamana 20
Off Jalan Sungai Jati
41200 Klang Selangor Darul Ehsan
Tel : 03-5514 3000 Fax: 03-5161 9372
.
.
.
.
Process Engineer
Location : Johor - Skudai
.
Responsibilities:
The successful candidate will be assigned to go through work processes, compile information on the processes and lead the new project development.
He / She will be required to perform special assignments and to work closely with the management.
.
.
Responsibilities:
The successful candidate will be assigned to go through work processes, compile information on the processes and lead the new project development.
He / She will be required to perform special assignments and to work closely with the management.
.
Requirements:
Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Industrial), Engineering (Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding) or equivalent.
Good written and oral communication skills both in Bahasa Malaysia, Chinese, English
At least 5 year(s) of working experience in the related machining environmental, preferly in auto-lathe, CNC turning and milling processes.
Preferably Executives specializing in Manufacturing/Production Operations or equivalent.
Self independent, responsible and strong leadership personality.
Highly committed and willing to learn.
Computer literate.
Full-Time positions available.
Applicants should be Malaysian citizen or hold relevent residence status.
.
Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Industrial), Engineering (Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding) or equivalent.
Good written and oral communication skills both in Bahasa Malaysia, Chinese, English
At least 5 year(s) of working experience in the related machining environmental, preferly in auto-lathe, CNC turning and milling processes.
Preferably Executives specializing in Manufacturing/Production Operations or equivalent.
Self independent, responsible and strong leadership personality.
Highly committed and willing to learn.
Computer literate.
Full-Time positions available.
Applicants should be Malaysian citizen or hold relevent residence status.
.
Interested candidates are encouraged to apply online or you may submit your detailed resume to: Lee Heng High Precision Engineering Sdn Bhd
16 Jalan Bistari 4
Taman Industri Jaya
81300 Skudai Johor
Tel: 07-5112650, 5115803 & 5116035 Fax: 07-5125418
Email: admin.dept@leeheng.com.my
.
.
.
Production Engineer
Location : Johor
.
Responsibilities:
Provide technical support in production operation
Knowledge of programming and CNC turret punch operation
Experience in sheet metal works
.
.
Responsibilities:
Provide technical support in production operation
Knowledge of programming and CNC turret punch operation
Experience in sheet metal works
.
Requirements:
Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic), Engineering (Industrial), Engineering (Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding) or equivalent.
Required language(s): Bahasa Malaysia, Chinese, English
At least 2 year(s) of working experience in the related field is required for this position.
Preferably Junior Executives specializing in Manufacturing/Production Operations or equivalent.
Full-Time positions available.
.
Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic), Engineering (Industrial), Engineering (Mechanical), Engineering (Metal Fabrication/Tool & Die/Welding) or equivalent.
Required language(s): Bahasa Malaysia, Chinese, English
At least 2 year(s) of working experience in the related field is required for this position.
Preferably Junior Executives specializing in Manufacturing/Production Operations or equivalent.
Full-Time positions available.
.
CEI Industries Sdn Bhd(499427-A)
No. 5, Jalan Istimewa 1,
Taman Perindustrian Cemerlang,
Ulu Tiram, Johor 81800
Telephone: 60-7-8636248 (Shima - HR Dept) Fax: 60-7-8634248
.
.
.
Production Engineer
Location : China - Foshan
.
Responsibilities:
Responsible for overall plant production, process and operations
Ensure effective use of materials, equipments and other resources in producing quality products
Assist in planning and organising plant resources to achieve production goals
Performs safety regular reviews of all manufacturing process introduces in the plant & where necessary, assist in generating appropriate production operations
.
.
Responsibilities:
Responsible for overall plant production, process and operations
Ensure effective use of materials, equipments and other resources in producing quality products
Assist in planning and organising plant resources to achieve production goals
Performs safety regular reviews of all manufacturing process introduces in the plant & where necessary, assist in generating appropriate production operations
.
Requirements:
Minimum 5 year(s) of working experience in Manufacturing Industry
Familiar & knowledge in Welding and fabrication process (CNC, Turret Punch, Welding & etc)
Computer Literate
Good command of English and Mandarin
Strong Inter-personal & communication skills, with goods leadership quality
Matured & Independent with positive attitude, able to work under pressure
.
Minimum 5 year(s) of working experience in Manufacturing Industry
Familiar & knowledge in Welding and fabrication process (CNC, Turret Punch, Welding & etc)
Computer Literate
Good command of English and Mandarin
Strong Inter-personal & communication skills, with goods leadership quality
Matured & Independent with positive attitude, able to work under pressure
.
Chosen Metal Industries Sdn Bhd
No.34, Jalan Masyhur 5,
Taman perindustrian Cemerlang,
Ulu Tiram 81800.
.
.
Process Engineers
Location : Prai Free Industrial Zone 1
.
.
Requirements:
Candidate must possess a Bachelor's Degree in Chemical/Polymer/Chemistry/Indsutrial Engineering or equivalent from a recognised university.
Required skill(s): MS Office.
Required language(s): Bahasa Malaysia, English
Preferably 1-2 years related working experience in a manufacturing environment.
Related experience in ISO9001 and 14001 will have an added advantage.
Good planning, organizational and leadership skills.
Highly committed, responsible and with good attitude mindset.
Good computer skill knowledge and possess excellent, verbal and written communication skills.
Fresh graduates are encouraged to apply.
.
Candidate must possess a Bachelor's Degree in Chemical/Polymer/Chemistry/Indsutrial Engineering or equivalent from a recognised university.
Required skill(s): MS Office.
Required language(s): Bahasa Malaysia, English
Preferably 1-2 years related working experience in a manufacturing environment.
Related experience in ISO9001 and 14001 will have an added advantage.
Good planning, organizational and leadership skills.
Highly committed, responsible and with good attitude mindset.
Good computer skill knowledge and possess excellent, verbal and written communication skills.
Fresh graduates are encouraged to apply.
.
Interested candidates are invited to apply online or write in together with a comprehensive resume, non-returnable photo, telephone number, current & expected salary to :
Penfibre Sdn Bhd (Fibre Plant)
Lot 109 -114, Prai Free Industrial Zone 1
Prai 13600 Fax : 04- 390 7995
.
.
.
.
DESIGN ENGINEER
Location : Johor
.
.
Requirements:
Must possess at least a Bachelor's degree in Mecahnical Engineering or equivalent.
Ability to design to internationals standard such as ASME, IMDE,DNV
At least 2 years of working experience in the related field is required for this position.
Experienced in pressure vessel,piping design is advantageous
Proficient in AUTOCAD, Solidwork & MS Office
Good communication in English and Bahasa Malaysia
Self motivated and responsible
Able to meet demanding work schedules.
.
Must possess at least a Bachelor's degree in Mecahnical Engineering or equivalent.
Ability to design to internationals standard such as ASME, IMDE,DNV
At least 2 years of working experience in the related field is required for this position.
Experienced in pressure vessel,piping design is advantageous
Proficient in AUTOCAD, Solidwork & MS Office
Good communication in English and Bahasa Malaysia
Self motivated and responsible
Able to meet demanding work schedules.
.
Attractive remuneration will be offered to selected candidates which will commensurate with experience and ability. Interested candidates are encouraged to apply online or submit your detailed resume stating full personal particulars, working experience, present and expected salaries with recent passport-sized photograph (non-returnable) to:
The Personnel Manager
McAlister Engineering Sdn Bhd
Lot 454, Jalan Keluli,
Pasir Gudang Industrial Estate,
81700 Pasir Gudang,
Johor
Telephone: 60-7-2518408 Fax: 60-7-2518403
Telephone: 60-7-2518408 Fax: 60-7-2518403
.
.
.
PQA ENGINEER
Location : Melaka - Batu Berendam
.
.
Responsibilities:
Manage parts quality, co-ordinate in-house and supplier/subcontractors on all parts he/she handles.
Willing to travel within Malaysia and Asia regions at short notices.
.
Manage parts quality, co-ordinate in-house and supplier/subcontractors on all parts he/she handles.
Willing to travel within Malaysia and Asia regions at short notices.
.
Requirements:
Degree in Electrical/Electronics Engineering with minimum 1 year experience in quality assurance; or
Diploma in Electrical/Electronics Engineering with at least 3 years of similar experience.
Experience in SQE / engineering in a multinational company.
Good knowledge in statistics.
Good communication & interpersonal skills.
Preferably can speak, read and write well in Mandarin.
.
Degree in Electrical/Electronics Engineering with minimum 1 year experience in quality assurance; or
Diploma in Electrical/Electronics Engineering with at least 3 years of similar experience.
Experience in SQE / engineering in a multinational company.
Good knowledge in statistics.
Good communication & interpersonal skills.
Preferably can speak, read and write well in Mandarin.
.
You may send your applications together with detailed Curriculum Vitae (CV), including telephone contact number, a recent photograph (n.r.) and expected salary to:
Manager
Human Resources Department
TEAC ELECTRONICS (M) SDN BHD (201132-U)
Lot 22 Batu Berendam FTZ
Phase III
Batu Berendam
75350 Melaka
Tel: 06 - 284 3402 Fax: 06 - 284 3471
.
.
.
Senior Electrical Engineers/Electrical Engineers
Location : Sarawak - Mukah
.
.
Responsibilities:
Trouble shoot, maintain and preventive management on all electrical equipments and installations up to 11kV.
Responsible for electrical equipments and installation improvement projects including troubleshooting and sourcing of parts.
Manage new facilities with effective preventive electrical program.
Good hands on experience in installation and maintenance of transformers.
.
Trouble shoot, maintain and preventive management on all electrical equipments and installations up to 11kV.
Responsible for electrical equipments and installation improvement projects including troubleshooting and sourcing of parts.
Manage new facilities with effective preventive electrical program.
Good hands on experience in installation and maintenance of transformers.
.
Requirements:
Degree in Electrical, M&E Engineering or related discipline with appropriate Chargeman Certification from Suruhanjaya Tenaga.
Possess at least five (5) years of hands on experience from a large manufacturing environment or electrical installation industry.
Experience in electrical and installation system design, maintenance and troubleshooting will be an added advantage.
Ability to communicate and write in Mandarin is an added advantage as to interface with China contractors and suppliers.
Must be willing to based in Sarawak.
We provide competitive salary and benefits for the right TALENT including accommodation, logistics and other perks.
.
Degree in Electrical, M&E Engineering or related discipline with appropriate Chargeman Certification from Suruhanjaya Tenaga.
Possess at least five (5) years of hands on experience from a large manufacturing environment or electrical installation industry.
Experience in electrical and installation system design, maintenance and troubleshooting will be an added advantage.
Ability to communicate and write in Mandarin is an added advantage as to interface with China contractors and suppliers.
Must be willing to based in Sarawak.
We provide competitive salary and benefits for the right TALENT including accommodation, logistics and other perks.
.
If you are the TALENT that best match the job, kindly email us your latest CV or write in to the below address with current and expected salary & benefits plus a non returnable latest photograph to:
The Group Human Resources Department,
The Group Human Resources Department,
PRESS METAL SARAWAK SDN BHD,
Lot 1797, Bukit Belimbing,
Jalan Balakong,
43300 Seri Kembangan,
Selangor Darul Ehsan.
.
.
FACTORY QUALITY ENGINEER
Location : STATIONED IN LONGGANG, SHENZHEN OF PRC
.
.
Requirements:
Degree holder in Industrial Engineering, Quality Management or equivalent
Minimum 5 years experience in quality field in manufacturing environment
Experienced in Six Sigma and SPC implementation in manufacturing environment
Familiar with other relevant international safety standard and quality system
Responsible for overseeing all the quality assurance programs to maintain the product quality in compliance with quality requirements and customers' satisfaction
Responsible for implementing and maintaining the Quality System and reviewing the quality improvement project on a regular basis
Excellent communication skills in English and Chinese (Mandarin)
Stationed in Longgang, Shenzhen of PRC is required
.
Degree holder in Industrial Engineering, Quality Management or equivalent
Minimum 5 years experience in quality field in manufacturing environment
Experienced in Six Sigma and SPC implementation in manufacturing environment
Familiar with other relevant international safety standard and quality system
Responsible for overseeing all the quality assurance programs to maintain the product quality in compliance with quality requirements and customers' satisfaction
Responsible for implementing and maintaining the Quality System and reviewing the quality improvement project on a regular basis
Excellent communication skills in English and Chinese (Mandarin)
Stationed in Longgang, Shenzhen of PRC is required
.
We offer competitive salary package including 5-day work week, double pay, medical insurance, etc to right candidates.Interested parties, please send your resume with expected salary to
.
.
The Human Resources & Administration Dept.
5/F Gold Peak Bldg.,
30 Kwai Wing Rd.,
Kwai Chung, N. T.,
Hong Kong. OR by
e-mail: sylva_recruit@goldpeak.com
.
.
.
Mechanical Engineer
Location : Kuala Lumpur - SUNWAY DAMANSARA TECHNOLOGY PARK, PETALING JAYA
.
Responsibilities:
Position requires an engineer with a well rounded personality having sound knowledge of electrical & electronic engineering, design and application.
.
Essential Functions:
Responsibilities will include but not be limited to the following:
Assume the lead engineer's role on assigned projects.
Plan, schedule, execute and coordinate program of assigned engineering work in design, assembly production and projects installation.
Ensure proper coordination and effective communication, internally and with the clients, on projects execution, including but not limited to preparing reports.
Able to read, understand and prepare mechanical engineering drawings, sectional drawing and Approved for Construction (AFC) drawings.
To prepare, review and upgrade mechanical components (materials selection and drawings) for CD92TM Homogenizer and its auxiliaries.
To ensure that mechanical components are manufactured and assembled according to given specifications.
Understood materials codes, grades, manufacturing tolerances and mechanical properties of ferrous & non-ferrous materials.
Sound knowledge of heat transfers across fluid / solid medium and boiler systems.
Exposure in the functions of rotary machines ( centrifugal pumps, compressors, blowers and turbines system ) fluid dynamics ( turbulence & laminar flow ) and strength of materials.
Able to read, interpret piping & fittings symbols and functions.
Able to do identify and calculate head losses in the piping system
To actively involves in continual improvement activities
To facilitate and conduct test run on all products assembled and manufactured by the company.
Monitoring production and project control, cost estimates, quantity take-offs and components forecasts.
Job will generally be performed in an office and factory environment.
To comply to all working terms and conditions set upon by the company
.
.
Responsibilities:
Position requires an engineer with a well rounded personality having sound knowledge of electrical & electronic engineering, design and application.
.
Essential Functions:
Responsibilities will include but not be limited to the following:
Assume the lead engineer's role on assigned projects.
Plan, schedule, execute and coordinate program of assigned engineering work in design, assembly production and projects installation.
Ensure proper coordination and effective communication, internally and with the clients, on projects execution, including but not limited to preparing reports.
Able to read, understand and prepare mechanical engineering drawings, sectional drawing and Approved for Construction (AFC) drawings.
To prepare, review and upgrade mechanical components (materials selection and drawings) for CD92TM Homogenizer and its auxiliaries.
To ensure that mechanical components are manufactured and assembled according to given specifications.
Understood materials codes, grades, manufacturing tolerances and mechanical properties of ferrous & non-ferrous materials.
Sound knowledge of heat transfers across fluid / solid medium and boiler systems.
Exposure in the functions of rotary machines ( centrifugal pumps, compressors, blowers and turbines system ) fluid dynamics ( turbulence & laminar flow ) and strength of materials.
Able to read, interpret piping & fittings symbols and functions.
Able to do identify and calculate head losses in the piping system
To actively involves in continual improvement activities
To facilitate and conduct test run on all products assembled and manufactured by the company.
Monitoring production and project control, cost estimates, quantity take-offs and components forecasts.
Job will generally be performed in an office and factory environment.
To comply to all working terms and conditions set upon by the company
.
Requirements:
Candidate must possess at least a Diploma/Degree in Mechanical/Materials/Marine Engineering or equivalent.
Required language(s): Bahasa Malaysia and good to excellent command of English. Must possess good communication and presentation skills. Knowing German language is an advantage but not necessarily essential.
1-5 years working exposure in Mechanical or Production functions in manufacturing and assembling enviroment in small medium size companies with multi tasking job responsibilities, or those with working exposure to slow and medium speed Diesel engines in ships or power plants.
Fresh local graduates with a minimum of 3.0 CGPA score are encouraged to apply. For British universities graduates, a Second Class (Lower) honours is acceptable.
Good to excellent computer word processing and spreadsheet skill level. Ability to operate AutoCAD design software is a must.
Candidates must be willing to work and travel to the job sites including overseas for installation and troubleshooting work assignments.
Candidates must be hands on, independent and willing to work on extended hours. He must be physically healthy.
Full-Time positions available.
.
Candidate must possess at least a Diploma/Degree in Mechanical/Materials/Marine Engineering or equivalent.
Required language(s): Bahasa Malaysia and good to excellent command of English. Must possess good communication and presentation skills. Knowing German language is an advantage but not necessarily essential.
1-5 years working exposure in Mechanical or Production functions in manufacturing and assembling enviroment in small medium size companies with multi tasking job responsibilities, or those with working exposure to slow and medium speed Diesel engines in ships or power plants.
Fresh local graduates with a minimum of 3.0 CGPA score are encouraged to apply. For British universities graduates, a Second Class (Lower) honours is acceptable.
Good to excellent computer word processing and spreadsheet skill level. Ability to operate AutoCAD design software is a must.
Candidates must be willing to work and travel to the job sites including overseas for installation and troubleshooting work assignments.
Candidates must be hands on, independent and willing to work on extended hours. He must be physically healthy.
Full-Time positions available.
.
Successful candidates will enjoy competitive remuneration package commensurate with their qualification and experience.Interested candidates kindly submit your comprehensive resume stating your current and expected salary together with recent passport-size photograph to:
.
.
The Human Resources Department
S.I.T Schiffs- & Industrie Technik (M) Sdn Bhd
11A Jalan PJU 3/44 Sunway Damansara Technology Park
47810 Petaling Jaya Selangor Darul Ehsan
Applicants are to e-mail their applications to sharifah@sit-malaysia.com and info@sit-malaysia.com ( or less favourably fax to +603 7803 2633 )
S.I.T Schiffs- & Industrie Technik (M) Sdn Bhd
11A Jalan PJU 3/44 Sunway Damansara Technology Park
47810 Petaling Jaya Selangor Darul Ehsan
Applicants are to e-mail their applications to sharifah@sit-malaysia.com and info@sit-malaysia.com ( or less favourably fax to +603 7803 2633 )
